[mjw1208]

Re: Indesit WIXL133 int door lock indicator /off

Replaced the mains filter and tried on spin program seems all ok ,but when tried on a wash program fault re-appears !!!!

[mjw1208]

Re: Indesit WIXL133 int door lock indicator /off

Rewired motor plug connections and door lock connector with individual spade connectors and fault still persists ,any further suggestions anyone ?

[mjw1208]

Re: Hoover A3632 Washer – old un

No leak ,the water just pours out the back when water is filling in the soap drawer

[mjw1208]

Re: Zanussi TC7114W condenser dryer – noisy drum

Thanks for part numbers and info much appreciated Mike

[mjw1208]

Re: Zanussi TC7114W condenser dryer – noisy drum

First thought was a rear bearing though looked for a part thru qualtex and they don’t seem to list any rear bearings for this model so assumed fault maybe elsewhere ,but if anyone knows part numbers that would be great help so we can go armed with plenty of spares etc, thanks

[mjw1208]

Re: Indesit WIDL126 keeps going

Checked heater and found it open circuit replaced it all ok now thanks for advice,

[mjw1208]

Re: Haier HW-C1470TVEME-U

Try http://www.haierspares.co.uk for the part numbers you need ,you will probably need to buy the oil seal from them but the front and rear bearings are available a lot cheaper elsewhere from suppliers like http://www.simplybearings.co.uk
Mike

[mjw1208]

Re: Whirlpool AWOD6727 drum noise

Thanks for info , suspected may be sealed drum does anyone know what Whirlpool charge for the callout as customer should be able to claim free parts under warranty and just pay the labour .Other option is landfill of course.

[mjw1208]

Re: BEKO WM5120W are they any good and is £168.99 a good pri

Good price for the machine and it will give good service if your on your own and use it sparingly once a week to wash you pants ,but if you have a family of 4kids and two adults and want to use it everyday then the repair man may be a regular visitor .Also sealed drum on some new beko’s so if (when) the bearings go it’s for the landfill .

[mjw1208]

Re: Whirlpool awg5122 bearings

Yes same bearings 6205zz and 6206zz as used in the fast spin beko washers (buy it as a beko bearing set and get the seal as well ) proper job !!

[mjw1208]

Re: tricity aw1100w washer – no spin

Changed timer programmer and checked functions same fault as before , think i’ve missed something any suggestions anyone ?

[mjw1208]

Re: Whirlpool awg5122 bearings

Yes that’s the avenue we thought about going with this machine, customer already had someone out to it before us and condemned it as b.e.r. without taking top off machine , though it does look repairable – split tub etc. and we need the work (and money) even if some engineers don’t

[mjw1208]

Re: sovereign heater elemeny shl12007

Connect and reasonable price – words that don’t really go together does it ?

[mjw1208]

Re: Hotpoint hvl 211 washer

Sent module to EMW and returned all ok , now machine working 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} thanks to Tony at EMW

[mjw1208]

Re: Hotpoint hvl 211 washer

Is there any Hotpoint specialists out there who can advise on the above problem , also when in spin mode it goes to drain out ok and spins ok but when programme finishes light 1,3.4 flash and door lock light flashes .

[Author]

Posts