Forum Replies Created
-
Posts
-
Re: hotpoint WD440 Washer Dryer
If pipes are noisey some may be loose and when water switches off it sends a shudder through them.
Re: Zanussi ZCE650W time/temperature control knob
sometimes the inner part of the knob becomes worn or a metal clip inside the knob is missing, if this is the case a new knob will have to be ordered.
Re: Miele g638 plus
ok try this, strip down appliance filters make sure circ motor is free, you can turn the impeller here.
If stuck motor faulty if free change pressure switch had this fault before just making sure.Re: Miele g638 plus
Normally this fault is not filling quick enough.
try checking fill filters, not syphoning and good water pressure.Re: Ariston oven timer – frequently malfunctions, how to cha
Firstly you will have to dis connect the power supply.
Remove oven from hosing, remove lid. remove controll knobs and facia panel, screws should then be accessible for timer unit.Re: old AEG tumble dryer belt
Hi there,
Ive not fitted a belt on one of these for a long time but if i remember correctly you remove the top and sides, you can then push the drum back from the front bearings sliding the belt from the front, ita a bit tight but i think thats how we used to do them.Re: Baumatic B180 Oven
Hello housewife,
sounds like the heating element is faulty you carnt really do any checks unless you start to strip the cooker. If you do disconnect power first.Re: Diplomat ADP5701 Oven Door adjustment
Hi there,
Oven doors do not have any adjustment, there may be a problem with the hinges/ guides or seal may be more than 1.Re: F&P Wash. Mach. M#GW708 – leaking from underneath ma
Have a look around the door seal, sometimes on a spin water is forced in to small holes. Same applies to the outer drum it maybe cracked but make sure you unplug appliance before any work carried out.
