Forum Replies Created
-
AuthorPosts
-
msappliance
ParticipantRe: Miele T495C
I also find tipping the appliance back and keeping it there makes re allignment a lot easier, the drum will otherwise drop. main faults are stats, make sure venting is ok in and out and you can see thru filter ok. 😉
msappliance
ParticipantRe: SMEG DW1 710 E1 leaking
Sounds like you door may not be sealing is the d/w level?.
Try scooping water out with a dish cloth.msappliance
ParticipantRe: Electrolux double oven door
I think you will have to get a new door as i have not yet found any glue to stick these back on and also has to be fire proof.
msappliance
ParticipantRe: Hotpoint FridgeFreezer RFM60A Door Seal Problem..
Hi
If the seal pushes into a grove you should really buy a new seal as using glue normally dosnt work and is a pain to get off if in the future you decide to change the seal.
msappliance
ParticipantRe: NEFF 1031 / 1051 wont heat up 🙁
Have you set the timer clock?, the oven wont work unless you do.
msappliance
ParticipantRe: LG 1460FHD Washer
As far as i can remember lg do not have a capacitor, Appears more to be a motor fault.
September 19, 2006 at 7:01 pm in reply to: Homark Single Fan Oven – Model 02-700401 Type B11 #189005msappliance
ParticipantRe: Homark Single Fan Oven – Model 02-700401 Type B11
Appears element is faulty if stat light and fan run when switched on to oven but no heat, sometimes there is a burnt wire to heating element, Mike
msappliance
ParticipantRe: Samsung f/f american style.
Yeah evap plate clean customer went on holiday for 2 weeks and switched off appliance, any ice would have defrosted looks like system fault, thanks Mike
msappliance
ParticipantRe: Samsung f/f american style.
hi funkyboogy, been to look at machine today mod rs21fcsv s/n 847243cw500194d. Running freezer at -5 normally runs at -20, motor always running no large ice build up anywhere to show lack of gas maybe pot?. appreciate any advice thanks, mike
msappliance
ParticipantRe: Kenwood d/w
no checked float and pipes, thanks anyway.
msappliance
ParticipantRe: Buffalo griddle spares
Thanks, wil;l try in morning let you know. 😀
msappliance
ParticipantRe: Bosch wet2820gb/13 motor
Yep dry joint on relay on pcb, bit of a pain to get out but it works ok. Thanks.
msappliance
ParticipantRe: Bosch wet2820gb/13 motor
Will let you know how i get on thanks 🙂
-
AuthorPosts
