multiplexor

Forum Replies Created

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • September 6, 2015 at 5:30 pm in reply to: Stoves model 058568000 (900Ea range). Grill not working. #429876
    multiplexor
    Participant

    Re: Stoves model 058568000 (900Ea range). Grill not working.

    Hi,

    after looking on the internet i think that the pcb mentioned in my earlier post is a fan control module. Is it possible that this could stop the grill from working if it was faulty?

    Thanks
    Mike

    January 16, 2013 at 7:11 pm in reply to: Hoover HSWF 167 -80 #388035
    multiplexor
    Participant

    Re: Hoover HSWF 167 -80

    Thanks Martin, a perfect diagnosis!! There was lots of rubbish in the filter although i have got to admit that it took me a long time to remove the filter as i did not know that the screw in the handle had to be removed before undoing it :boops:

    Cheers
    Mike 🙂

    March 6, 2012 at 9:06 pm in reply to: Bosch Classixx Dishwasher #370205
    multiplexor
    Participant

    Re: Bosch Classixx Dishwasher

    All fixed now!! 😀

    March 6, 2012 at 10:02 am in reply to: Bosch Classixx Dishwasher #370204
    multiplexor
    Participant

    Re: Bosch Classixx Dishwasher

    Sorry, i forgot to mention that the model number is SGS45C02GB/11 :boops:

    March 2, 2012 at 10:04 am in reply to: Bosch Classixx Dishwasher #370203
    multiplexor
    Participant

    Re: Bosch Classixx Dishwasher

    Thanks Martin, i will order the flow meter today. Can i access the flow meter from the front, or would i need to take a side panel off?
    Thanks
    Mike

    September 1, 2008 at 3:43 pm in reply to: Bosch Exxcel not draining properly when wash has finished #261336
    multiplexor
    Participant

    Re: Bosch Exxcel not draining properly when wash has finishe

    Hi,
    The type no. is S9G1B and i think that the model number is SGS43A12/27.
    The matrix was badly blocked up originally but it appears to be clear now. Is it normal for a certain amount of water to stay in the matrix after the machine has finished its wash?

    Thanks
    Mike

    October 25, 2007 at 7:58 pm in reply to: Hoover Tumble Dryer D6376 #232015
    multiplexor
    Participant

    Re: Hoover Tumble Dryer D6376

    Hi Martin,

    Thank you very much for the information. I didn’t realise that there was a slot on the motor bracket and thought that both pulleys fitted into the base plate. I have fitted it as you described and it is now working perfectly again. 😀

    Thanks
    Mike

    August 20, 2007 at 10:08 pm in reply to: Neff B1420 oven #225195
    multiplexor
    Participant

    Re: Neff B1420 oven

    Well if you insist, i will just turn off the power then……

    August 20, 2007 at 10:03 pm in reply to: Neff B1420 oven #225193
    multiplexor
    Participant

    Re: Neff B1420 oven

    Thanks for all of the information Greg, I will order the parts tomorrow and will wear my thickest wellies while fitting the motor!!!

    Cheers
    Mike 😉

    August 20, 2007 at 9:41 pm in reply to: Neff B1420 oven #225191
    multiplexor
    Participant

    Re: Neff B1420 oven

    Hi Greg,

    the model number is E-Nr B1420W0GB/05
    Is it easy to get to the motor to change it?

    Mike

    August 20, 2007 at 8:38 pm in reply to: Neff B1420 oven #225189
    multiplexor
    Participant

    Re: Neff B1420 oven

    Hi Greg,

    Thanks for your reply. The fan at the back of the oven isn’t running although i could see the element next to the fan heating up from cold. Is it likely that the motor has burnt out and if so, is it an expensive item to replace?

    Thanks
    Mike

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)