Nina

Forum Replies Created

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • May 5, 2013 at 10:38 am in reply to: Electrolux ERN16300 ??Broken hinge #393951
    Nina
    Participant

    Re: Electrolux ERN16300 ??Broken hinge

    Hi Don,

    Thanks for your reply and sorry for the lateness of this one, work has got in the way of “real life”.

    The correct model number is EUU11400 and the product number is 922822694. I’m 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure the problem is the top hinge as the internal spring is flapping around and bits of broken plastic have fallen out of it!

    Hope you can help with the most appropriate part and some advice on changing it 🙂

    Many Thanks,

    Nina

    December 20, 2011 at 5:17 pm in reply to: Hood stopped working #365746
    Nina
    Participant

    Re: Hood stopped working

    I’m thinking this is a motor or capacitor problem. Going to try and replace the capacitor first and if that doesn’t work then the motor.

    A job for after Christmas I feel!

    December 19, 2011 at 7:47 pm in reply to: Hood stopped working #365745
    Nina
    Participant

    Re: Hood stopped working

    Hi Bob,

    It was on earlier today and then suddenly stopped working.

    The lights are still working but there is no noise at all.


    Nina

    December 19, 2011 at 6:14 pm in reply to: Hood stopped working #365743
    Nina
    Participant

    Re: Hood stopped working

    Sorry.

    The model number is HJA2540.


    Nina

    September 2, 2007 at 5:29 pm in reply to: Whirlpool AWO/D 6707 – removing drum or heater element #226364
    Nina
    Participant

    Re: Whirlpool AWO/D 6707 – removing drum or heater element

    Bra wire gone through drum!! Trying to retrieve it…

    lol

    January 27, 2007 at 9:04 pm in reply to: AEG competence 5308 B-D fan problems #202464
    Nina
    Participant

    Re: AEG competence 5308 B-D fan problems

    I found 926-014/378514. Would this be the PNC number?

    Also found KD 611.577. Not sure what this though.

    October 8, 2006 at 1:40 pm in reply to: Not enough water going into Hygena APL8212 #189608
    Nina
    Participant

    Re: Not enough water going into Hygena APL8212

    Thanks for the advice.

    All the internal hoses are ok, but I am having problems finding the air collection chamber.

    Could you please help with this?

    Also could there be any other explanations for the lack of water going into the machine. There is currently not enough water to cover the heating element.

    Many Thanks

    January 5, 2006 at 4:55 pm in reply to: Leaky Hygena ADL 8212 #159651
    Nina
    Participant

    Re: Leaky Hygena ADL 8212

    Thank-you for all your help. The spray arm fell apart as it came away from the dishwasher! Have sent an email as you suggested for the kit.


    Again many thanks!

    (Will probably hear from me again when trying to put it together!) 😆


    Nina 😀

    January 5, 2006 at 4:02 pm in reply to: Leaky Hygena ADL 8212 #159649
    Nina
    Participant

    Re: Leaky Hygena ADL 8212

    Bloody computers! Sorry for the multiple posting of that message, was not intended!

    😮

    January 5, 2006 at 4:00 pm in reply to: Leaky Hygena ADL 8212 #159648
    Nina
    Participant

    Re: Leaky Hygena ADL 8212

    Many thanks Dave.

    Have found the leak, just not sure how to fix it!

    It’s coming from the top of the spray arm where it enters the dishwasher. There are no splits in the plastic. Thinking the washer might need replacing, but should I look for anything else too?

    Nina

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)