Forum Replies Created
-
Posts
-
Re: indesit freestanding gas cooker thermocouple ?
r600a wrote:Hi
Pull he knobs off and then push them back on gently and retry it..Most people use too much force when they turn the gas taps causing them to go past a stop point within the knob.
Bryan
just tried that and had some success moved the knobs about and ones that didnt work did and visa versa I have been told by the wife she took em all off to clean them last week .so i need to mess about a bit because the logic of all the same knobs doesnt apply
thanks ladsRe: indesit freestanding gas cooker thermocouple ?
model : Indesit it50g s/n203271023 25750720000 :tup:
Re: indesit freestanding gas cooker thermocouple ?
thanks Its just uncanny how both packed up together I am going to rake the cooker out and get the model and get back to you
Re: TRICITY BENDIX DH090 sorting the squeel
ok i understand dont talk to me about bearings i spit on bearings they hold no fears to me i have fitted them when others fear to fit I shall move forward with vigour and determination and if the result is nor fiscaly viable a good covering of beef dripping will suffice
thanksRe: TRICITY BENDIX DH090 sorting the squeel
just had a look no water but a slight dried scale stain on the floor . Ok is it something that i could sort
Re: Putting Indesit wixe127 just on spin
it has a spin emblem on the front seperate to the dial that also has one but when i press the spin button nothing happens
The washer does work i might add it was going this morningRe: Hotpoint BHWM 129 lights flashing ,help
thanks for your help Looks like you can get a cheap and cheerful for the price of the repairs
Re: Hotpoint BHWM 129 lights flashing ,help
I have tried pulling the plug for 30 mins no go, The neon lights you mention are six in total 1st no light , 2nd rinse 3rd spin 4th pump out all lit up 5th end ,no light 6th lock lights, on hope that will help
regardsRe: Indesit WIXE 127 fabric softener drain
sorted i removed the water dispenser from the valve to the tray and found one small hole in the top bunged with gunge not really accessable without removing anyway this was the hole that filled the conditioner tray with water on the last wash . I t works fine now thanks all for the advise
Re: Indesit WIXE 127 fabric softener drain
Thats great information thanks i put a multi across both solenoids and they both had continuity on ohms setting so i will take the whole dispenser out and check what you suggest
Re: Indesit WIXE 127 fabric softener drain
thanks appreciate the help . I notice it has two valves were the mains water goes in .Is one for normal cycle and the other for the last conditioner cycle ,just like to know
Re: Indesit WIXE 127 fabric softener drain
the softener is still in the dispenser after last cycle and there is no water if it is the valve as suggested were is it and how do i check it It is the same softener the current wife has been using sinse machine was new, she tells me.
