paulpaddison

Forum Replies Created

Viewing 15 posts - 91 through 105 (of 196 total)
  • Author
    Posts
  • in reply to: Hotpoint WF620 code? #182716
    paulpaddison
    Participant

    Re: wf620 code?

    forgot to mention hadto open the old door switch just to bypass it to get machine to think door was shut. then it displayed f01 have replaced pump and bypassed switch again but still shows the f01 weird thing is i also fitted a brand new door switch and still the machine thinks the door is open. also checked wiring back to the module.
    could a power surge have upset the module? even tried the same type of board but off a machine with a diffrent display but that one just shows f09
    any ideas ? or part ex on a new machine 😉

    in reply to: Hotpoint WF620 code? #182714
    paulpaddison
    Participant

    Re: wf620 code?

    Hi a customer of mine has the same machine. problem is it just wont work. says door. then when replacing the door lock door locked light shows but still the machine wont lock the door and when starting it says
    f01 i know f11 is motor anybody got a chart of codes for this hoptoint WF620 or experienced this problem ? i checked everything even replaced the fused spur on the wall

    in reply to: unfair bank charges #207093
    paulpaddison
    Participant

    Re: unfair bank charges

    i gave up and went to bed last night.
    but checked under profile and found the time zone was + 10 have alterd it again now and will use this post to check. my pc clock is fine.
    bit scary when drinking and finding half the night had gone without noticing 😳

    in reply to: unfair bank charges #207090
    paulpaddison
    Participant

    Re: unfair bank charges

    yup its time i headed off to bed to prepare for the hanvover.

    gegsy your Post was at: Fri Mar 09, 2007 11:53 am

    my pc says 02:09 am is uk whitegoods hosted overseas or in a diffrent time zone 😳 or shall i go to bed now and behave.

    in reply to: unfair bank charges #207088
    paulpaddison
    Participant

    Re: unfair bank charges

    am i daydreaming here or did i realy post last message at “Fri Mar 09, 2007 11:46 am”

    in reply to: unfair bank charges #207087
    paulpaddison
    Participant

    Re: unfair bank charges

    Thanks for that gegsy i now see im not alone with the unfair charges.
    i am currently starting self employment again and after i made some money in first week bank took £90 in fees. next month there taking £72
    👿 now i goto work to pay what bills i still have outstanding and to save to pay next month fee’s i am going to apply for my 6 years of statments to see what they owe me to see if its worth claming or not.
    if anybody has any advice for me and lloydstsb please please post here or PM me. Thanks all

    in reply to: freezer stat #204772
    paulpaddison
    Participant

    Re: freezer stat

    thanks for speedy reply chaps. will pass info onto customer any idea on delivery times ?

    in reply to: Subject: Road Tax Petition PLEASE TAKE A QUICK LOOK. #201911
    paulpaddison
    Participant

    Re: Subject: Road Tax Petition PLEASE TAKE A QUICK LOOK.

    yay been on the news that pertiton did the trick the trial of the gps road tax has been postponed well over 1 million signatures and rising 😀

    in reply to: Subject: Road Tax Petition PLEASE TAKE A QUICK LOOK. #201909
    paulpaddison
    Participant

    Re: Subject: Road Tax Petition PLEASE TAKE A QUICK LOOK.

    sorry about the url 😥 i scanned the page into the pc and missed correcting that bit. i am not totaly shure if its fake or not ?
    i do know the black country is to trial a gps road tax system in next five years where we get charges per mile. and at a higher rate for rush hours.
    and that the cctv cams and petrol station cams will be linked back to whoever monitors the tax system to make shure we havent removed the gps box thing from our vehicles. it has its good and bad points for us all.

    in reply to: Noisy boiler, not the missus #196783
    paulpaddison
    Participant

    Re: Noisy boiler, not the missus

    reminds me of a flat i just been working on a young couple lived in it previousley and when the lady found her boyfriend was cheating on him she kinda ripped out the toilet and sink smashed every door in the place destroyed plasterboard walls and all sorts 🙁 luckly the chap who moved into the flat after the last lot moved out had moved in after it was renovated 😀 i think the only thing that survived that girls temper was the boiler.

    in reply to: Noisy boiler, not the missus #196781
    paulpaddison
    Participant

    Re: Noisy boiler, not the missus

    hi has the boiler problem been sorted yet ❓

    in reply to: Mobile Telephones #105857
    paulpaddison
    Participant

    Re: Mobile Telephones

    same kind of kit yes but it has a conversion cradle to suit my nokia 6230i
    the kit im selling ( still for sale ) is from anouther old car i had. i sold the car and removed the kit. it has a new cradle but will only suit phones like the 6230.
    i honestly wouldent be without the car kit best thing is it charges the phone too mutes the radio when call comes through.
    i spoted the tomtom one v2 does bluetooth so i may sell both the car kits and get one of them for my route finding. 😀

    in reply to: self employed #198388
    paulpaddison
    Participant

    Re: self employed

    spooky 😯 how i managed to miss reading that starter pack link is beyond me. i think i got so usto reading what people wrote that i just ignore headders and footers. maybe i could blame the drink ?
    anyway thanks for pointing that out 😀

    in reply to: self employed #198387
    paulpaddison
    Participant

    Re: self employed

    Thank you chaps 😀 its been a while since i last signed up and the old link i had in a email to the repairs@ form no longer works 🙁
    i shall give ian a call saturday if he is working then ? or maybe first thing monday

    in reply to: Noisy boiler, not the missus #196780
    paulpaddison
    Participant

    Re: Noisy boiler, not the missus

    ohh its a combi boiler 😀 sounds like ur diverter valve may be on its way out. ur gonna need a boiler engineer to replace the pressure gauge and check diverter valve you may need the system flushing or simply an adative adding to one of the rads to help clean the system either way dont leave it too long if that valve does go you loose hot water heating may still operate

Viewing 15 posts - 91 through 105 (of 196 total)