Forum Replies Created
-
Posts
-
Re: The Martin Conumdrum
Very good. Very, very good.
Now if only they’ll stop and think, before mouthing off.
*Waits for Mrtin in the morning……*
Can I be very rude to him? Please?
Chris.
Re: Hoover HNL6166 Spin on load problem
It’s a tank out job. Make diagrams and take pictures – the job is basically straightforward, but very labour intensive. Book a Sunday….
Penuin45.
Re: September 2009
Sorry Steve – nothing. Kind of losing the will to live a bit over the whole thing.
Chris.
Re: Hoover HNL6166 Spin on load problem
Smokindave wrote:1, The part number 41001233, I cannot find on any search. Where do I get it and how much is it?
spares@ukwhitegoods.co.uk will get you one promptly. It’s not a job many people will take on, so the part is not listed in the shop@ facility.
Smokindave wrote:2, I am going to assume that the answer to my first question is it costs a lot, so I assume the spider is a casting, hence why it cracked? Therefore could a fabricated piece of metal be attahed/bolted on to strengthen this part?
The spider usually cracks because the cast webbings of the arms become clagged with old soap. An alkaline reaction then takes place which rots the aluminium alloy. A repair is not usually a practical option.
Check before buying – turn the drum so that each drum paddle in turn is at the six o’clock position. Take hold of the edge of the inner drum and pull towards you firmly. The broken arm will soon reveal itself.
An extreme drum support failure can be seen HERE.
Penguin45.
Re: The Martin Conumdrum
Have you still got records of page reads and stuff active? 5p a page to read and shut the public forums = big bill long term. Might change the grumblers perspective……. 😆
Chris.
Re: bc radio 2 popmaster
Is he one of ours? Make yourself known, Sir!
He only got one right, mind you.
We ought to get Gegsy on – photographic memory for all things musical.
Chris.
Re: Bosch Classixx not draining
Sorry, Niknik, that’s not right. Catch the light along the top edge of the door inner – it should be etched on the top.
Penguin45.
Re: Hotpoint WT960 error code f08?
Heater relay fault on pcb. Can be heater and wiring, but it’s usually the pcb.
Power off if you intend to repair this yourself.
Penguin45.
Re: zanissi dryer tce7276w
Float jammed in “up” position can cause this; attack with Stanly knife.
Chris.
