Forum Replies Created
-
Posts
-
Re: delonghi ess602 halogen temp regulator?
Regulator has probably failed. P/no 050019004 – spares@ukwhitegoods.co.uk should be able to get you one promptly.
Penguin45.
Re: white knight 44aw
Your number is a Connect Distribution stock code. Use the part numbert given to source the part at a sensible price.
spares@ukwhitegoods.co.uk will be able to get it for you promptly.
Penguin45.
Re: Electra AWM1100A ECO noisy drum & won’t spin (at all
Merloni-built machine – back panel of drum is removed by undoing the clamp band at the back. Make a note of all the wiring – we can’t help you if you get this wrong.
Bearing set is HERE if required.
Penguin45.
Re: whirlpool ADE 957 dishwasher
ADG957?
Constant flashing is F1 – temperature sensor failure. You’ll need one of THESE.
It is just possible that, if your kitchen is exceptionally cold, that the sensor is “out of range”. Pouring a jug of warm water into the sump a few minutes before you wish to use it may restore function.
Power off if you intend to sort this for yourself.
Penguin45.
Re: Bosch SGS09L02 GB not letting water in
Water off, kinked fill hose, failed inlet valve are your principle suspects.
Penguin45.
Re: In search of the fourth cord
Someone been editing the 0800 thread? Lee8 has posted more provocative comments since earlier.
lee8 wrote:I found the best way to deal with JTM was via my solicitors and the local court. 😉
Chris.
Re: Fagor Innova dishwasher
If it only trips when it’s pumping out, I’d be looking at the drain pump.
Model number would be useful.
Penguin45.
Re: Dishwasher from b and q model dw602bi
Belling haven’t built any either – it’s all just badging. What’s the platform is what we need to know. Midea, Haier, Fagor, Vestel….. the list is pretty endless.
Chris.
Re: SMEG DWI409C
Not a recognised code, so probably a corruption issue. Mains suppressor, dispenser solenoid, even the motor capacitor are all prime suspects – the pcb may have bought is as well anyway.
Chris.
Re: Motor problem Bosch WFO2865GB
4/5 ohms across the armature is about right. Stripping the motor and cleaning out the carbon dust can help.
All too often I find that an armature is effectively cooked by people running the brushes right to the very end – it then generates electrical noise as soon as it tries to pick up speed, which the computer doesn’t like and aborts the spin programme.
Penguin45.
Re: whirlpool branded smeg dishwasher pcb
Hey – I asked you that question a couple of years ago! 😀
:p45:
