rocker

Forum Replies Created

Viewing 15 posts - 616 through 630 (of 1,132 total)
1 2 3 … 41 42 43 … 74 75 76
  • Author
    Posts
  • February 14, 2011 at 5:19 pm in reply to: Zanussi 14850 Prod No 91460531200 #344599
    rocker
    Participant

    Re: Zanussi 14850 Prod No 91460531200

    Hi Martin, sorry correct No 91460531200 (I hope) !! John

    February 13, 2011 at 12:26 pm in reply to: Smeg DWF64 #344418
    rocker
    Participant

    Re: Smeg DWF64

    Thanks Eastmark, I realised Bob was incorrect, thanks for your advice, I took it to be the o rings, as you know its impossible to identify exact leak when testing. I will use orginal O rings after your advice.
    Cheers john

    February 11, 2011 at 10:57 pm in reply to: TEFAL Actifry FZ70015 help required #344325
    rocker
    Participant

    Re: TEFAL Actifry FZ70015 help required

    connect showing Obsolete Fan motor (5045175698183)

    February 9, 2011 at 8:29 pm in reply to: miele spares #344102
    rocker
    Participant

    Re: miele spares

    miele 01235 233133

    February 7, 2011 at 8:18 pm in reply to: Hotpoint DWD129 #343861
    rocker
    Participant

    Re: Hotpoint DWD129

    Thanks Bob and all of you who replied. john

    February 7, 2011 at 7:36 pm in reply to: Hotpoint DWD129 #343859
    rocker
    Participant

    Re: Hotpoint DWD129

    Sorry gents I have totally given you wrong info..have now woken up..it is a hotpoint UY46K

    February 7, 2011 at 7:11 pm in reply to: Hotpoint DWD129 #343857
    rocker
    Participant

    Re: Hotpoint DWD129

    Don,
    The model is correct, it could be built, in I assumed it was freestanding.
    the switch is listed on conect site.
    John

    February 3, 2011 at 8:08 am in reply to: Smeg DF612SDX (D/W) #343416
    rocker
    Participant

    Re: Smeg DF612SDX (D/W)

    I did mean the o rings. thanks John

    February 2, 2011 at 6:16 pm in reply to: Creda Solarglo hob E920EW #343339
    rocker
    Participant

    Re: Creda Solarglo hob E920EW

    Thanks Martin. John

    January 27, 2011 at 7:59 pm in reply to: Miele W844 #342647
    rocker
    Participant

    Re: Miele W844

    Thanks Mike

    January 26, 2011 at 6:51 pm in reply to: Miele W844 #342645
    rocker
    Participant

    Re: Miele W844

    Thanks eastlmark. John

    January 24, 2011 at 11:32 pm in reply to: Elica Tamaxa 70SS extrator fan #342403
    rocker
    Participant

    Re: Elica Tamaxa 70SS extrator fan

    Thanks Lawrence. john

    January 19, 2011 at 7:39 pm in reply to: Neff U1442WOGB/03 double oven #341151
    rocker
    Participant

    Re: Neff U1442WOGB/03 double oven

    I did return to this today..and completed the job..
    Just to update..to gain access to stat..remove top cover to access switch bank…then standing above the oven you can see the knob shaft , useing a flat screwdriver ease the long (white) knob off the stat shaft once this moves it will pull off easily from front. then useing a long torx you can release the stat screws..done

    Pauls advise was correct, but to release the knob its easier to do as above, unable to move from front !!

    As Mike suggested, I hope this info will be of use to all of you.
    Thanks again Paul & Mike for your help.
    John

    January 18, 2011 at 7:54 pm in reply to: Alba PX906 range cooker #341662
    rocker
    Participant

    Re: Alba PX906 range cooker

    Don, I did look for the brand name only, than rang but no joy.
    many thanks for your help.
    John

    January 16, 2011 at 4:25 pm in reply to: Neff U1442WOGB/03 double oven #341149
    rocker
    Participant

    Re: Neff U1442WOGB/03 double oven

    nomadpaul, thanks for getting back to me, I will try what you advise, I am sure you must be right as there are no screws ect on the other side.
    john

  • Author
    Posts
Viewing 15 posts - 616 through 630 (of 1,132 total)
1 2 3 … 41 42 43 … 74 75 76