[Scotgr]

Thanks Dave,

Yes I’m definitely letting them deal with it. Im just trying to get as much info as possible.

I will try and remember to post here once it’s sorted with what happens.

Thanks

[Scotgr]

Hi Dave thanks for the reply. Is that something that’s easy fixed. I’m in the process of getting lg out to have a look as it is still under warranty.

Thanks

[Scotgr]

My father in law decided that he would just buy a new machine as we suspect board failure also.

thanks

[Scotgr]

I’ve actually just realised the blue and white is 51v on one side and a red and blue on the other that’s 174v

[Scotgr]

Hi Dave I’m going to get a new one at the end of the week and hopefully that solves my issue. Thanks for your help

[Scotgr]

Hi Dave, thanks for your reply. I have ran the machine today and the kitchen towel underneath is wet so it’s still leaking ever so slightly. I can’t see any obvious cracks and the seal is in good condition.

if you skip to 2 minutes 50 on this video you will see how it’s all goes together. I wasn’t sure whether I could possibly put some water mixed with food dye to see if the colour would show me where the water is travelling and how it is escaping. https://youtu.be/_GOXIW6HzEY

thanks

[Scotgr]

Phoned Electrolux and they are coming out FOC to update the software next week. I was expecting a fight but they had no issues at all! Thanks for the help!

[Scotgr]

Is this something I should just call zanussi service and ask if they can update the software? I would hope that they would do this free of charge as it is an error on their behalf. Thanks for your help Dave very much appreciated!

[Scotgr]

It’s almost as though it always thinks it’s off balance and aborts and just keeps going round in a loop trying to rebalance the washing. Even though it’s empty.

[Scotgr]

Ok so:

Mod ZWF01483WR Type FLP0944C1
Prod No 914910304 02

I am suspecting it’s the control board that has a fault.

[Scotgr]

To the best of my knowledge this machine has a self cleaning filter and you are unable to clean it as there is no access to it.

[Scotgr]

Hi Dave. I have had the belt off defiantly not the pump as it does this when the pump is off. It’s a very high pitch squeal when it is going round at a constant speed.

[Scotgr]

Re: Hotpoint WDPG9640 Aquarius + restarting rinse cycle

Thanks for all the help. Element changed and it seems to be working fine now! 🙂

[Scotgr]

Re: Hotpoint WDPG9640 Aquarius + restarting rinse cycle

Thanks for the response I will try on Tuesday to wriggle it out.

[Scotgr]

Hotpoint WDPG9640 Aquarius + Water heater

I posted on Saturday about my mums washing machine. After some fault finding I have discovered that the water element is away. (I have checked it with a multimeter) and ran a 90 wash stopped it and felt the temp of the water it was cold). My problem is I can’t seem to remove the elemen from the bottom of the drum. It comes out about 10mm and then it seems to catch on a 1mm high step all around the rubber seal. Is there a trick to getting this out as it feels absolutely solid.

Thanks

PS sorry for the new topic if this is an issue please merge.

[Author]

Posts