Forum Replies Created
-
Posts
-
Update:
Pulled the oven out and an unattached connection, looking closely it looks like it has overheated and burned.
So I am thinking maybe the connection not tight enough and arcing. So should I just clean up make sure connection is tight or should I look for some other cause?
https://imgur.com/SUizkyyThanks Dave, yes the red light comes on so when I pull the cooker out I will check the element although it does look ok with no blistering.
After much messing around and not knowing why it has decided to start working again, I dont know what the issue was although I still suspect something to do with the door catch or the door itself.
Re: Candy wash part fills -stops
Hopefully it is the brushes as they are at the end of life, very little left. I have ordered new ones so hopefully……….
Re: Candy wash part fills -stops
I assume the brushes are relatively easy to change, I have done brushes on electric hand tools before.
I will pull the machine out tonight and have a look.
Re: New world DW60 stopped working
Thanks for the reply Dave,
I had a quick look and I think option 3 could be the answer, I will see if over the next day or two I can adjust whatever on the hinges as it does look as is if the alignment could be out.
I suspect the lock is ok but will `test` by setting the washer and manually push in the switch (now that I know how to pull it back out re your previous advice). The metal hoop I have already tried and there is no apparent adjustment.
Re: New world DW60 stopped working
I thought post on this thread as I think my problem stems from my original post.
Dishwasher works, BUT…….
When I close the door it sometimes beeps once and then gives a double beep and turns off. It appears that the contact part that locks the door is not connecting properly as I can firmly hold the door in place (beeps once) but when I release the pressure it sometimes beeps twice for `off` I can usually get the cycle to work eventually.
I cannot see any means of adjusting, anyone got experience of this?Re: New world DW60 stopped working
Now sorted. 🙂
I eventually released the spring and got it back to the proper position and then had a hard time of it to get that spring back on, but made a tool from some stout wire to assist me, with 2 hooks on the end to hold the `bar` and the spring and pull it up to where it is seated, and that worked.
Done a rinse and a wash and so far working properly.
Thanks indeed for your assistance.
Re: New world DW60 stopped working
OK I have taken the switch but still unable to free without using excessive force,
Images attached.
