[simon26r]

Re: My fridge doesn’t switch off when it reaches set tempera

Hi. Could also be a system fault. Depending on where the sensor is. If you can find a secon hand pcb for the same model it should fit. If you have to program ine shot cards ar 15-25 pounds plus you need the programmer. 100 ish.

[simon26r]

Re: lg american f/f

Not 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure but probably the main pcb. Tech notes say check connections.

[simon26r]

Re: Samsung side by side fridge freezer started beeping

Hi. First i would check and see if its had the mod.

Blue sticker on the rating plate or a yellow sticker on the back will show its been modded.

If not look at this
http://www.samsung.com/uk/homevisit/

[simon26r]

Re: Beko wmb91142lw

Hi. Could just be motor carbons

[simon26r]

Re: I need a couple of washing machines looked at in Southam

A little bit too far for me otherwise i would

[simon26r]

Re: Zanussi heat pump dryers

Hi. If its like the lg dryer they have a fault.
The fine dust gets through the filter and blocks up the condensing unit inside like a fan on a pc. Worth having a look if you can get at it. My first lg dismantle took me nearly 2 hours.

[simon26r]

Re: why cant they make them like this anymore ?

Because no one wants to pay for quality. If you think about it a washing machine was £250 – £300 20 years ago now you can get them for £179.. something has to give.

bush £169.99 on offer in argos plus your £10 voucher for spending over £100 £159.99
take the cost of delivery from that £10-£15 2 men Plus fuel
so say £145
Argos are here to make money so £20-£30 profit brings the price down to £115
you get the point

You then have import tax’s then 20{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} vat. take out the travel cost and someone has to guarantee the machine for 1 or 2 years..

People will pay £49 per month for a mobile phone or sky but don’t want to spend money on an appliance. so that makes cheap euro Sh@#

[simon26r]

Re: Age double oven model D8800-4-M

Hi. it could be a thermal overload if the inside is getting too hot.

[simon26r]

Re: lg directdrive washer

Hi. Dont know what b is but i will have a look. Pm me the model. I probably have a spare motor but one way to test is if you turn off the machine and spin the drum it normally powers up the machine and stops you moving the drum.

[simon26r]

Re: Wanted AEG motor.

You may be lucky but these things go for a pastime.
Pure rubbish.

[simon26r]

Re: culina oven

if you have model i have some info on them. might not be up to date..

[simon26r]

Re: Fitting a beko fridge freezer door seal

Thanks 🙂

[simon26r]

Re: Beko WMD78120 PCB?

No. Pump works on the cancel cycle. Can’t find a part number for main pcb 🙁

[simon26r]

Re: Beko wm does nothing but drain stuck in program.

Hi.
will not fill. Will not change programme. Tried to get into test but not surebif correct. Hold down start button power up then turn to spin. Lcd lights up all symbols then back to nothing. Brushes lok fine. Have removed and almost like new.

[simon26r]

Re: Parts prices

1.who do you use most for spares -why ?

Qualtex as they are normally cheapest 90{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the time. I would use masterpart.com but they never have any stock. Sometimes ebay as sent first class and cheaper than any supplier

2.who do you use least – why ?

masterpart because they never have a full order in stock

3.What things do you take in to consideration when ordering parts
i.e is it just price or is it delivery times etc etc

Most importantly is if its in stock then the price. Delivery charge does bug me.

4.How frequently do you place orders ?

between 1 and 4 a week

5.Do you hold accounts or pay as you go ?

Qualtex have an account thats why they normally win my orders. Masterpart and connect pay as i go

[Author]

Posts