Forum Replies Created
-
Posts
-
Re: Miele G1222SC Dishwasher Error F14
Hi eastlmark, thanks for the reply. You any idea how old this dishwasher might be?
Re: Whirlpool ADG7560 854275515879 draining error
Hi Criscold, got same fault on ADG7560 854275515879 (stops mid cycle, on light flashes 4 times), is Owi sensor you mention above pressure switch?
Re: Whirlpool ADG7560 D/Washer 854275515879
By the way it seemed to fill to the correct level then started beeping and pumped out with the 11 flash code.
Re: Whirlpool ADG7560 D/Washer 854275515879
Cheers for the replies guys, this machine was a real bitch to get out. Only had it lying on its back to fit the wash motor which was deffo chuffed, fingers crossed it was water that got splashed somewhere.
Re: MAYTAG 21PNDGW No drum action
Sorry Keith, just noticed your post. Yes got machine going it was the main (motor drive) PCB as suspected.
Re: band has come off
Hmmm, would agree with r600a – pulley loose, if you manage to get the belt on and run it will sound rather rough!!! Check for play on the belt pulley, should be a torx t40 screw.
Re: Prima LPR721 Washer Dryer not Spinning
Cheers Aqualectric, have spoken to EMW they reckon it is deffo the timer. Need to go back and get the 6 digit 513/514 number, however they have offered to fix original timer if they don’t have one.
Re: Dyson Dc16 handheld vac
Hmmmm sounds like the battery pack is up the creek. Had quite a few of these handhelds with similar problem. (Runs so long – cut off – release trigger – press trigger – works – cuts off – and so on)
Re: Hoover VHV781c-80 Exhaust TOC
Thanks for that Martin, you’re a true gent. At least I know i’m ordering the correct parts now (item 443 thermal fuse)
Cheers…..Re: Hoover VHV781c-80 Exhaust TOC
Hi guys, talking about the TOC behind the front panel (down near the fluff filter). The heater assembly inc. stats have been changed. Cheers???
Re: Zanussi ZWG7140P
Cheers for that Martin, it looks like this machine won’t go into diagnostics!!! Grrrr.
