[Steven]

Re: Hitachi R826BC1 Frost-free F/F

Could be HTCR621DF115? special order if avialable from connect

Steven

[Steven]

Re: HOTPOINT ERROR CODE = E30

If brushes ok, check motor block wires,sometimes there not pushed in properly or damaged pcb.

Steven

[Steven]

Re: New Training Dates Stoke on Trent & Coventry 28th &a

Where is the training to be held in Coventry on the 29th june ❓

[Steven]

Re: Candy washing machine

I had one similiar, found in the end it was a sticky pump, would work ok when you put in on just pump and spin but after long wash the pump gets hot. The timer selector switch some of them can come apart so you can clean the contacts have done it myself, but watch out for the small springs etc inside dont fall out!!
If this model has the recirc hose above the pump then check for leaks onto pump have had this before shorting pump out.

Steve

[Steven]

Re: Smeg Dishwasher

Cheers Greg,

How The hell i missed that, must be going 😡

its always the parts you least expect.

Thanks again

Steve

[Steven]

Re: Bottom Seal on BRANDT D/W

I have come across similar problem with a leak in the corners, usally to do with weight of the outer door panel sometimes you need to adjust the door springs, bit tricky as you have to pull dishwasher out to adjust.

steve

[Author]

Posts