[stryder]

Re: zanussi zwd147s tub seal seems an odd one

me too, only i used to take all the stickers off and put them back as though i`d solved it 🙂

[stryder]

Re: zanussi zwd147s tub seal seems an odd one

thanks mate
its a bit like doing one of those rubic cubes 🙂

[stryder]

Re: zanussi zwd147s tub seal seems an odd one

i don`t want egging on or any other type of farm food
i just want the f- the darn thing to work properly so i can plumb it in permanently and forget about it!

[stryder]

Re: zanussi zwd147s tub seal seems an odd one

just what i didn`t want to hear 🙁

[stryder]

Re: zanussi zwd147s tub seal seems an odd one

him again
i put some more washing in and set it as before and would you beleive it- nothing just the sound of the pressure switch clicking. i looked in the condensor, and no water trickling through so i tried several times to set it to dry for 1 hour but it would`nt have it . then for some uknown reason i decided to set it to drain, after it had drained i set it to dry again and this time worked fine . water trickling in and the element heating up and the fan spinning!

whats going on? 😕

[stryder]

Re: zanussi zwd147s tub seal seems an odd one

hi
i`ve checked the toc and that seems fine
i`ll just keep plodding on till this is sorted 🙂

[stryder]

Re: zanussi zwd147s tub seal seems an odd one

cheers mate i`ll check that as well
the washer works fine on washing and spinning its just the this problems i`m having with the drying thats doing my head in!
it was vibrating quite bad and there was a small leak of watercoming from the door so i screwed the back feet all the way in an and raised the front ones a bit. that seemed to do the trick,no leaks and hardly any vibration , even on 1400 rpm! 🙂

[stryder]

Re: zanussi zwd147s tub seal seems an odd one

thanks martin
i`ll double check that and get back to you.
just out of interest, how high should the water level in the condensor be ?

[stryder]

Re: zanussi zwd147s tub seal seems an odd one

hi all
the dryer is still giving me problems.
i put clothes in and set it to cotton and then set the time for maximum length. it goes right through the cycle without any probs but when open the door you are met buy a ton of hot steam and although the clothes are hot theyre still damp cos of all the steam in the tub. its as if the steam is just staying in the tub instead of going to the condensor .
anyone got any ideas whats causing this? 😕

[stryder]

Re: still farting about with the zwd1471s

no probs, i`ve sorted it 🙂

[stryder]

Re: sensor on zwd1471s

hi gandh1
i know a little bit about electronics it was the negatve bit that puzzled me but i still don`t have a clue about the “co-efficient” bit. i thought that was a maths term and i `ve always had trouble with that 🙂

[stryder]

Re: sensor on zwd1471s

yarankow 🙂

[stryder]

Re: sensor on zwd1471s

just out of interest, i read that NTC stands for negative temperature coefficient? but what does that mean in the real world? 🙂

[stryder]

Re: sensor on zwd1471s

iadom wrote:Isn’t it the small doofer marked 48c on the picture kwatt posted?

Why do you want to change it?

It doesn’t appear to be in the shop@ but the part number is 3792171021. An e-mail to spares@ukwhitegoods.co.uk may be in order. 😉
Isn’t it the small doofer marked 48c on the picture kwatt posted?

Why do you want to change it?

hi ladom i wanted to change it cos i thought i might have damaged it if i`d got the wires the wrong way round but i`ve since been told that it it doesn`t matter which way round they`re connected so i don`t need one now ,simples 🙂

[stryder]

Re: sensor on zwd1471s

better late than never
[img]

[Author]

Posts