[stryder]

Re: zanussi zwd147s tub seal seems an odd one

is the pump nearest to the back and at the bottomof the machine the recurculation pump and the one at the front at the bottom the drain pump? if so i have two blue wires conected to the recirculation pump and two orange wires connected to the drain pump, is this right?

[stryder]

Re: zanussi zwd147s tub seal seems an odd one

hi martin
it is a ZANUSSI ZWD 1471S, PNC 914601117 00
TYPE-P6348480
SERIAL NO.-53800028

[stryder]

Re: zanussi zwd147s tub seal seems an odd one

hi again – theres good news and bad
the good news is its back together. i connected it up to the water and plugged it in at the mains, all seemed fine, no error codes and spins really quiet(at the moment) only problem is its draining right away but not filling. if i`ve mixed the wires on the drain pump and the recirculation pump could this be the problem?

[stryder]

Re: zanussi zwd147s tub seal seems an odd one

hi quickwash
i still havent finnished this, i don`t get much spare time to work on it at the moment . pity i`m not doing this as a job , if i charged by the hour i`d be loaded 😆
there again i think my customers would just give up and buy a new washer!

[stryder]

Re: zanussi zwd147s tub seal seems an odd one

thanks mate .
just got a couple more things to do on it then i`ll plug it in and light the fuse and stand well back 🙂

[stryder]

Re: zanussi zwd147s tub seal seems an odd one

hi everyone , i`m back again and guess what .. i still haven`t finnished this 😆
i`ve got yet another question – under the heater blower duct
where the wiring runs there is a connector with 3 wires in it , 1 orange, one brown and one grey, the problem is theres nothing for it to plug into . i have come across stuff in the past where they had used a connecter plug to terminate wires or just join them together , could this be what this is?
could some kind person please advise as i`m getting close to finnishing this . i can see the light at the end of the tunnel 🙂

[stryder]

Re: zanussi zwd147s tub seal seems an odd one

thanks quickwash.
i`ill let you know when its back together if it actually works.
🙂

[stryder]

Re: zanussi zwd147s tub seal seems an odd one

thanks for the support everyone
and keep tuned for the next exciting eposode 😆

p.s i decided to order a new pair of shockers just to be safe

[stryder]

Re: zanussi zwd147s tub seal seems an odd one

great idea! nice garden
thanks for the help martin 😀

[stryder]

Re: zanussi zwd147s tub seal seems an odd one

er no, i think i`ll have to give that a miss 🙂
is that in your garden ?

[stryder]

lordhelpus wrote:Relax quickwash no news is good news. Stryders problems have still to come. Putting it all back together is the hardest part. I sense a new ISE sale coming. Thats where you come in.

you got that right ! 😕
got two small probs , i put most of it back together then realised that i had not put the five washers on the front weight when i screwed it back on the drum so had to take it all apart again. in doing so the two telescopic dampers have come apart from their other halves.do you think i could get away with just putting them back together or do i need a new pair? also can anyone tell me for sure if these five washers go on the front of the front weight as when when you put them on they are loose , do they go tight when you screw the screws in ?
getting really pi , fed up now but i am determined to put it back together even does just become another garden feature!

[stryder]

Re: zanussi zwd147s tub seal seems an odd one

bearing s in ,spider and inner drum in . now the part i`ve been dreading -putting it all back together 🙂
thanks for all your help.

[stryder]

Re: zanussi zwd147s tub seal seems an odd one

Martin wrote:It is the heater locator so be sure, when you put the 2 halves back together, you ensure the heater slides through it….OK?

how can you be sure its gone in as you wont be able see it with the two halves assembled?
have i done your head in yet with all these questions? 😆

[stryder]

Re: zanussi zwd147s tub seal seems an odd one

thanks mate 😀
i`d just like to say this forum is great! and uk. white goods is also great. great value , great service, grrrrreat. 10 out of 10 !

[stryder]

Re: zanussi zwd147s tub seal seems an odd one

not finnished yet! 🙂 i`m sure i can get another chapter out of this. heres another question – when i split the tub i didn`t notice at the time but there is a weird shaped clip attached to the outer drum half . its inside about halfway down on the smaller drum half . anyone got any idea what its for? 😕

[Author]

Posts