Forum Replies Created
-
Posts
-
Re: Bosch (got the model number now) dishwasher
tdubya wrote:Luckily, I managed to catch the tenant in when I called by this afternoon.
The model number is SGV4313GB/13
Also, I’ve got the broken part and have found that the bright red pieces inside the arm are loose which I’m thinking means there is an absence of a spring to hold the clips in place. What do you think ?
No spring, the red piece is meant to “float”. If you’re trying to attach the spray arm to the feeder tube at the rear, then you’re barking up the wrong tree 😉
The arm attaches directly to the top basket. There is a clip that fastens to the rear of the basket and a tonge that holds it to the centre of the basket.
HTH.
Re: Gogos Crazy Bones
Don’t think you’ll find many of these GoGo’s in pumps. My two have loads of ’em and they’re a bit big to drop down into sumps etc 🙁
Re: Bosch Fridge Freezer KGV31421GB/01 Fridge not chilling
As Helo said, you need a refrigeration system engineer, with specialist kit to do this job.
Not a DIY job.
Re: Bosch/Smeg Washer dryer?
PINKY wrote:Intergrated are mainly Smeg used Hoover for a while. Free standing come out of China :rolls:
Eh ???
There is a W/D that is a Smeg, brought in as an interim measure.Never been a Hoover one, thats a Teknic.
AFAIK there is no freestander from China.
Re: Neff T/dryer belt fit help reqd.
I assume you mean the small belt
Remove front fan, wiring to motor and “handle” that holds it in place, note the position of the motor BTW.
Then everything pulls out towards the back. Nice and easy job really.
Re: neff induction hob
“h” normally means plate is warm
“H” means plate hot.
Does it still work ?. May not even be a fault. I’d ask her to dig out the instruction book.
Re: Recommend me an American Style Fridge/freezer
Is M-in-H Adam Hornsby’s alter ego ??
He is as passionate about buying rubbish as AH is about Miele
😆
Re: Bosch SGS56A72GB/17
reaper wrote:In retrospect I could have released it by unclipping the water valve cover and slipping a screwdriver underneath to lift it up.So I’m under the impression there are 2 different versions of this part or is there a modification?
The actual plate that the suppressor sits on will unclip from the rear. No need to remove any panels at all.
AFAIK there is only one version.
