Forum Replies Created
-
Posts
-
Re: Bosch WVF2402GB/02 Inner Drum change
You will need 059132 screw set, to fix the spider to the drum.
The dryer duct will need to be lifted out the way, to remove the drum from the front.
If you are replacing the complete bearing cross, do yourself a favour and tap the bolt holes out before you try and refit the new cross. Also order the front tub seal 069632.
BTW it’s a pig of a job 🙁
Re: Help! Ignition On Gas Ring Sparking – Any Ideas Please
You still need to be gas safe to fit the ignition switches. Call a gas safe engineer to sort it.
Re: iPad
kwatt wrote:
Anyways, the kids love the games and some of the books on it,so there’s one use already… Shuts the kids up, so it ain’t totally useless after all!K.
That in itself makes it probably the best thing in the world ever 😀
Re: BOSCH SGV56A130GB/22
Same coils, different plungers… have inter changed coils many times without a problem.
Re: Help with new Siemens d/washer
The programmed ones will be in short supply soon. You will then need the BSH tool and laptop to “flash” the PCB ie code it.
Re: Siemens Hydro Sensor, Help to locate water heating eleme
14 and 17…. POWER OFF please.
If it is o/c then be warned it’s a pig of a job 😉
Re: Bosch HBN430550B/02 Selector switch burnt out again
I always remake the connections onto the s/w… never had to go back yet 😉
Re: Bosch WAA24171GB/01 rinse LED flashing?
😕 You don’t have to cancel the fault, it will work once brushes are fitted 😕
Re: Holes found in clothing after washing?
These type of “holes” are usually caused by the customer using the wrong programme for the fabric.
In other words, the easy care prog spins at 800 RPM, the cottons 1200 RPM say. Customer thinks 1200 equals less drying time. Problem is the centrifugal force damages the less robust fibres by pulling them through the holes in the drum.
Re: bosch was28466gb/01
screws behind soap drawer. clip on rhs on the inside. timer knob comes away with fascia and control pcb.
