[talkingtent]

Re: Indesit IS60v wiring diagram

Thanks for the reply sorted it 🙂 we had another old tumble to check the wires with.

[talkingtent]

Re: INDESIT IDL40 NO HEAT

thanks for the info.

[talkingtent]

Re: INDESIT IDL40 NO HEAT

Will do asap thanks

[talkingtent]

Re: LG condensor dryer TD-C70045E clean filter light

No all clean ! Runs 10mins then clean filter light comes on ?

[talkingtent]

Re: Hotpoint Wd440 no go

Just to let anyone know with the same fault one of the White wires on motor block broken !! Thanks for your help.

[talkingtent]

Re: Zanussi ZWF1437w no go

Can anyone let me have the manual for this machine ?

[talkingtent]

Re: Zanussi IZ16S

It had rubbed through on the white plastic casing!! It was a tiny hole hardy visible.

[talkingtent]

Re: Zanussi IZ16S

Just to let anyone know it was a pin hole in the pressure tube causing the fault hope that helps.

[talkingtent]

Re: GDA BF71 dishwasher no fill

Just to let you know the fault was the impellor had come apart so not pumping correctly !!

[talkingtent]

Re: GDA BF71 dishwasher no fill

Just to let you know this machine is made by Bosch with the solid base if that helps .

[talkingtent]

Re: Bosch WFL2000 no rinse or spin not everytime

No it not open circuit?? 😥

[talkingtent]

Re: Bosch WFL2000 no rinse or spin not everytime

No earth fault on heater ? Stuck now ?

[talkingtent]

Re: Bosch WFL2000 no rinse or spin not everytime

Checked pressure chamber all clear. Do you think it is the board can’t always select a program ?

[talkingtent]

Re: Bosch Logixx SGS66A02/GB20 low water level

Just to let you know customer has now bought a new bosch dishwasher on offer from Comet!!!!!

[talkingtent]

Re: Bosch Logixx SGS66A02/GB20 low water level

Ok will try tomorrow. Will let you know the outcome!!!!

[Author]

Posts