[Ultrazapp]

Like Dave says the machine stops its cycle on a drying position, all programs listed on the left hand side of the soap draw get a “Hot” dry all programs on the right get a lower tempreture drying cycle as they are delicate wash programs. If the machine is going through the motions and the timer dial is selected for more than twenty minutes (last twenty mins is cool down cycle) and is still not getting hot you need a service engineer.

[Ultrazapp]

If you can give me the model number this is usually located on the front panel behind the door or on the bottom left hand side at the back I may be able to help. I have a lot of Hoover user manuals in PDF format which I could email to you.

[Ultrazapp]

Modern Hoover/Candy condensors are not easy to work on my engineers used to hate them. Best advise I can give is “There are no shortcuts” if you try you will get angry and frustrated. Take your time and literally strip it one screw at a time. It is possible to put the drum back in and then refit the belt. Common faults are heaters (Gias engineers cut and butt connect the wires) rear drum bearings, condensors block, jockey wheels get noisy, the drum shaft often shears off (kit available) they leak water from the ducting at the back and models with autosense need a good earth path through the rear of the drum. In short I agree they are not a good design.

“Good Luck” 😥 😥

[Ultrazapp]

Re: CANDY CONDENSOR TUMBLE DRYER

I used to be a service manager for Hoover Which model is it. ❓

[Ultrazapp]

Re: broadband

“Durrr” you might need this.

http://www.plus.net/business/broadband/ … =bus_small

😯 😯 😯

[Ultrazapp]

Re: broadband

try this link they were recomemded to me by an IT guru for our company. Apparantly all the IT engineers in thier company use it for personal use at home they also do business broadband 😆 .

[Author]

Posts