Forum Replies Created
-
Posts
-
It has started to leak again, it seems the tray at the back is constantly over filling. Any suggestions?
Re: Blanco Extractor Hood – Lights not working
The model number is BE/C/1029/S
The bulbs look fine. Sure they haven’t blown so my guess is it’s the switching unit/circuit board at the front that’s the problem.
Re: Daewoo Multi-Flow Frost Free – leaking water
Hi Bob, yes the freezer is at the bottom. Not sure what model it is but the brochure lists these models:
ERF-33.M / ERF-36.M / ERF-38.M / ERF-39.M / ERF-41.M
Re: Daewoo Multi-Flow Frost Free – leaking water
Our fridge freezer has developed another leak. This time it’s not the tray at the rear, it seems to be forming around the front on the floor.
I’ve check the door and it’s properly closed so it’s not leaking out from the actual storage area from what I can tell.
Any suggestions folks? 🙂
Re: Daewoo Multi-Flow Frost Free – leaking water
I’ve emptied the tray – it was overflowing, causing the leak.
The temperature in the fridge is fine – we already have some slight freezing of items, so reluctant to turn it up higher. The ambient room temperature is warm, so not really sure what could be causing this problem.
The same problem has once again reared its ugly head. Getting truly fed up with this machine now.
I had an engineer round last year and he fixed it within a few seconds by sticking a screwdriver down a hole and clearing a blockage of some sort in the base – any suggestions as to what he did?
Re: AEG Favorit 86070VI error Code 30
Thank Penguin45, have now submitted a request for an engineer.
My apologies – I had this same problem a year or so ago and was able to resolve the problem by using the method I described above.
How would you suggest I proceed, as I haven’t given up hope yet!
Yes, I used to be able to clear the error by tilting the unit to the left, but that no longer fixes the problem. I guess I’ll have to contact a repair man, but they seem to be very expensive.
Re: Zanussi ZK57 problem
It still works, but the noise (like a loud sucking sound) wakes us up – can anybody help?
Strange this. Once again I’ve pulled the machine out and tilted it to the left to drain the water out – only there wasn’t any to drain out! As dry as a bone.
So… what triggered the overflow system I wonder?
