[VillageIdiot2]

Re: NESN Again (The 2010 Thread)

I was told by Mark Reilly, the BSH work was tied up with NESN before DSG re-negociated the rates with RC. APPARENTLY, RC had no idea this work was up for grabs…? He also expressed immense anger becasue DSG had tied up a deal with NESN then approached RC for reductions, without RC knowing this.

Ade.

[VillageIdiot2]

Re: Spam

FarlFrewswege

[VillageIdiot2]

Re: Spam

leddyendapy

[VillageIdiot2]

Re: Spam

Reotmetly

[VillageIdiot2]

Re: sept 2010 meeting

True, although they’d probably decline, if they did attend & all hell broke lose, would be a tad embarrassing!

One for the future no doubt though 🙂

[VillageIdiot2]

Re: sept 2010 meeting

Another thought as I’m plodding through the GAP Analasis and my mind is working overtime, might it be a nice gesture to the OFT to invite them along?

I know they’d probably decline, but it might me ‘thought’ of as nice to offer?

Ade

[VillageIdiot2]

Re: WTA website update

YEY! I went through all the fonts and found the one that matches the rest of the site 🙂

My post has been edited 🙂

[VillageIdiot2]

Re: Spam

Blarpellalpet

[VillageIdiot2]

Re: Thermostat or Fan element?

You may have disturbed the cooling fan, remove top panel and spin it, you should hear the same noise and can suss it from there…

And no problem Paul, that’s what we’re here for 🙂

Adrian.

[VillageIdiot2]

Re: Thermostat or Fan element?

Smokey / Smell is just because of new element most likely and will go pretty soon. If there is a noise untill you un plug it, I’d say cooling fan (Under top panel) has either come loose or has something stuck in the fan assy which is making noises…

Adrian 🙂

[VillageIdiot2]

Re: sept 2010 meeting

bazza500 wrote: How do we get this across to the hoards of people who are coming?

Can get it to most on the Thursday night, but other than that, I’m sure Ken / Lawrence can intervene if unreasonable comments are made?

[VillageIdiot2]

Re: Spam

senorjosedereal & ideowoweK also 🙂

[VillageIdiot2]

Re: sept 2010 meeting

Just had an idea…

If the WTA folder is viable, I can print off 30 / 40 copies of the COP and insert into the folder. That way, everyone leaves with a copy 🙂

[VillageIdiot2]

Re: Thermostat or Fan element?

Ahhhhh!

There are spades that need to be re-connected to the element. You’ll have to remove the back cover now to locate them and re-fit onto the element. I’m sure that’ll put this issue to bed 😉

Adrian

[VillageIdiot2]

Re: sept 2010 meeting

Now Bernard has spoken in the RC Forum, we may now find some more agents might come outa the woodwork and express interest in attending 🙂

[Author]

Posts