Forum Replies Created
-
Posts
-
Re: UK Whitegoods Meeting – Feb 06
I would like to attend 😀 , is there any fee 😕 ? (appart from hotel)
Re: Hotpoint/Indesit TEST BLOCK
Hmmm, I remember the days, you connect the plug, via a usb cable to emit and you get…………….No Connection! It’s good on its own though for auto test, thats all i used to use it for. Oh, and I can recomend a good source to get a plug…………………. flag down a van 😳 , and offer the engineer £40-£50 quid for it!!!! Job Done 😉 !!!!
Re: Smeg DWD1SSE-1 Dishwasher PCB
Thanks for your replies guys, The job is via an Insurance Company so I will need to get autherisation first, I also need the programme selector PCB to, any ideas on price for that too so I can get autherisation? If it is autherised, I will have them so thanks again for your help. Once again, this site really does make life alot easier for us small repairers!
Re: indesit w101 fault
F08 Maybe? It has always beent the heater or thermister when i have the fill and drain thing, how many flashes of the light?
Re: Zanussi ZT102 timer blown
Hiya mate, apparently an obsolete part. I would use replacement timer mod (as per connections disk) electrolux DST1240805000. £132ish I belive. Hope this helps.
Re: Indesit WIDL126
……Or if you know of a Merloni Engineer, he will have emit, I’m sure for a small fee, he would re-write the eeprom for you, works for me 90{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the time.
Re: Indesit WIDL126
Yes I agree! PCB then hammer!!! By the way……..who are emw? I have never used them, are they any good?
Re: Known Test Procedures
Hotpoint Mistral Range of F/F
Test Procedure for these are –
Turn appliance off at the mains, press and hold SAVE and switch on at mains and release SAVE.
The sequence will now start –
Evap defrost heater will activate for 10secs, then
Gutter heater 10secs, then
F/F LED display 10 secs, then
Evap fan 10 secs.If a fault is found, the following error codes will apply –
E1 – Freezer thermister o/c
E2 – Freezer thermister s/c
E3 – Fridge thermister o/c
E4 – Fridge thermister s/c
E7 – Evaporator thermister o/c
E8 – Evaporator thermister s/c
EA – No feedback from baffle motor switch
EB – fridge baffle motor running constantly
EE – Defrost heater timed out.Hope these help!
Re: Zanussi fridge freezer – fridge not cold
May not be of any use to you, but i once had the same problem on another make f/f. the fan was going, but no cold air coming out of the vent in the fridge????? well, after removing the fan motor from the freezer wall, I discovered that the air channel between freezer and fridge was blocked solid with ice!! customer did a complete de-frost and it worked a treat. maybe worth a look a?
Re: Bernstein??
after about 35 phone calls………….! and a lot of time on hold, i eventually was told that bernstein were going through the hoop and i would not get a spare for the cooker hood (k600) at all (even though it is just 18mths old)!. i have given up and got my customer a really good deal on a new hood but thaught i would post the results of my efforts as some warning to you all incase you come across this yourselves.
Re: indesit tub
Hi, you want to cross your fingers it’s a sealed tub………………them backplates can be a right pain to reassemble!!!! Give me a whole tub anyday!!!!!! Anyways, if you remove the lid, you’ll see straight away whether it has a metal band around the rear or not.
