Forum Replies Created
-
AuthorPosts
-
whiskeyjack6058
ParticipantRe: Cannon Cucina C60 DPX F01 Error code???
Thanks for that Chris!
whiskeyjack6058
ParticipantRe: Smeg DI612C pulsing in cycle.. Weird!!!
Base of dishwasher is perfectly dry and I tested the heater with a 1000v megger insulation test and it was perfect. All its components seem to be functioning fine..
Rob.
whiskeyjack6058
ParticipantRe: Smeg DI612C pulsing in cycle.. Weird!!!
Base of dishwasher is perfectly dry and I tested the heater with a 1000v megger insulation test and it was perfect. All its components seem to be functioning fine..
Rob.
February 3, 2010 at 8:47 pm in reply to: Bosch SGV56A13GB/22 integrated dishwasher not washing clean #310872whiskeyjack6058
ParticipantRe: Bosch SGV56A13GB/22 integrated dishwasher not washing c
Thanks Chris, but the water level in the dishwasher is ok. I have been out to 3 integrated bosch dishwashers so far this week and they all had the same water level. I made a point of checking this after I read your reply to my post. There is a seam on the tub and it fills just about level with that as id the others I have been out to. The others had pump blockages.
Regards,
Rob.whiskeyjack6058
ParticipantRe: Siemens WDI1440GB/04 (non gen) drain pump needed.
Thanks for that Steve!
Rob.whiskeyjack6058
ParticipantRe: AEG LAV62800 Bearing kit required
Thanks for that Chris, it’s now on order. (my first order on UWG). I didnt know I could get spares on here..
Fantastic!
Cheers,
Rob.January 6, 2010 at 10:58 pm in reply to: AEG Lavamat 76689 update. Start/pause light flashes. #308071whiskeyjack6058
ParticipantRe: AEG Lavamat 76689 update. Start/pause light flashes.
Advanced engineering from Germany.. LOL I used to swear blind to my customers this was the ultimate brand of washing machine to purchase. I now reserve that thought. I reccomend Bosch now, they seem great! I love fixing washers, it’s what I do and always have done for nearly 20 years. The old AEG’s were pretty much faultless but the later ones seem to be a bit scary and still pricey!
January 6, 2010 at 10:19 pm in reply to: AEG Lavamat 76689 update. Start/pause light flashes. #308069whiskeyjack6058
ParticipantRe: AEG Lavamat 76689 update. Start/pause light flashes.
Forgot to say, I have scratched up the connections on the PCB and all the block connectors look fine..
Rob.
December 21, 2009 at 11:40 pm in reply to: Flavel integrated dishwasher lower spray arm needed. #306979whiskeyjack6058
ParticipantRe: Flavel integrated dishwasher lower spray arm needed.
The reason I need the lower arm is because it’s split and firing water over the bottom tub lip.. Do they send out a different arm then?
December 17, 2009 at 9:01 pm in reply to: Indesit DI450 integrated dishwasher module required. #306711whiskeyjack6058
ParticipantRe: Indesit DI450 integrated dishwasher module required.
Model is : DI 450 UK
S/N : 60616 2910
Another number : 37303820900Thanks,
Rob.whiskeyjack6058
ParticipantRe: Smeg built in dishwasher dispensor required
Thanks very much Bazza..
December 9, 2009 at 8:15 pm in reply to: Smeg SP680MF/D built in single oven. – Grill element? #306071whiskeyjack6058
ParticipantRe: Smeg SP680MF/D built in single oven. – Grill element?
bluming heck…. That was quick!! Thank you…
December 4, 2009 at 8:26 pm in reply to: Belling farmhouse 930 range cooker hinges required. #305599whiskeyjack6058
ParticipantRe: Belling farmhouse 930 range cooker hinges required.
Thanks Mike, just needed the right person for the job. Bl**dy connect are useless sometimes.
Thanks again,
Rob.November 22, 2009 at 11:49 pm in reply to: Proline top box little fridge freezer thermostat? #304398whiskeyjack6058
ParticipantRe: Proline top box little fridge freezer thermostat?
Yes, I did notice the garage setting switch on it. And as it happens, she was asking me about it… Hrmmm makes me wander now if she has been playing with it and not telling me the entire tale…. I explained that its an ambiance switch and should only be selected when placed in an un-heated garage but she didn’t say she had pushed it.. bet she has tho because the f/f was working perfect when I got there, at the time I put it down to a bad contact in the thermostat..
November 22, 2009 at 11:43 pm in reply to: Proline top box little fridge freezer thermostat? #304397whiskeyjack6058
ParticipantRe: Proline top box little fridge freezer thermostat?
yep, just the one stat and its one of those fridge master/cool zone skanky type things. Not sure of its contact temperature, I seem to recall there are a few different versions of these..
-
AuthorPosts
