wilroda

Forum Replies Created

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • July 12, 2012 at 7:14 pm in reply to: Bosch SG145E15 noisy. #378034
    wilroda
    Participant

    Re: Bosch SG145E15 noisy.

    Thanks!

    the e-nr number is

    SG145E15UK/14

    other numbers within box

    FD9006 00022

    February 13, 2010 at 8:20 pm in reply to: Bosch Classixx 1200 On/Off switch help pls #311936
    wilroda
    Participant

    Re: Bosch Classixx 1200 On/Off switch help pls

    THanks penguin45

    Sorry! meant the start switch!

    That sounds like a real problem!- we dont fancy a new pcb at that price!

    November 18, 2009 at 8:14 am in reply to: Whirlpool semi integrated. Door problem. #303091
    wilroda
    Participant

    Re: Whirlpool semi integrated. Door problem.

    Thanks for that. I have looked everywhere and cannot find the model number. As it was inherited with the house I cant find any information.

    However, my OH managed to work out why the door would not close -there was a broken spring lodged at the bottom of the door. Having removed that at least the door now shuts and the machine works! Now though, the door just drops with no support.

    This machine is on its last legs i think…..the drain hole never completely empties of water so i assume there is something further wrong with it but maybe i will let it limp along for a little longer.

    Thanks again

    February 10, 2009 at 7:47 am in reply to: Ignis oven door seals #276747
    wilroda
    Participant

    Re: Ignis oven door seals

    Thanks very much for that.

    So i guess i cant blame the oven for my bad cooking then!!……….lol

    February 9, 2009 at 9:46 pm in reply to: Ignis oven door seals #276745
    wilroda
    Participant

    Re: Ignis oven door seals

    Thanks

    So….. if there are only three seals – should the oven drip steam etc?

    or is this normal..

    September 16, 2007 at 10:42 am in reply to: Bosch Classix 1200 sticking during cyle #227674
    wilroda
    Participant

    Re: Bosch Classix 1200 sticking during cyle

    Thanks for that – I wll watch it carefully and see if i can find out when it ” sticks”. If it is sticking on the wash cycle, what could be the cause do you think?

    Thanks for the help so far

    September 15, 2007 at 7:12 pm in reply to: Bosch Classix 1200 sticking during cyle #227671
    wilroda
    Participant

    Re: Bosch Classix 1200 sticking during cyle

    It appears to work absolutely normally until it starts the rinse cycle… it does rinse, but it goes on and on and on………

    once i have spun it separately i have found that the clothes are warmer to touch than usual……

    thanks

    December 17, 2006 at 3:29 pm in reply to: Washing machine door seal replacement #198062
    wilroda
    Participant

    Re: Washing machine door seal replacement

    Thanks for that!
    I have found a spare on this site so shall replace it after xmas. In the meantime, would it be possible to ” turn” the seal so that the tear is at the top? …..it may lessen the leak as a temporary fix. ….how do you undo the tension band around the seal?

    Thanks for your help

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)