Forum Replies Created
-
AuthorPosts
-
A1TEC
ParticipantRe: Neff microwave/oven model, ENR H7871N 2GB
Could be a monitor fuse, not sure about that actual model but worth checking all internal fuses.
A1TEC
ParticipantRe: How ‘Northern’ are you?
Martin wrote:
A1TEC wrote:
😆 I am in Hull so it say’s.It put me there too, I’ve never been near the place. I was born and lived in Barnsley for years and someone said I should never go to Hull as it’s grim there. 🙁
I have been to Hull to do a job once, i still have bad dreams and that was 20 years ago. 😉
A1TEC
ParticipantRe: How ‘Northern’ are you?
😆 I am in Hull so it say’s.
A1TEC
ParticipantRe: Scottish Black Pudding
I am sure i shot that bugger back in February! 😯
A1TEC
ParticipantRe: Scottish Black Pudding
Martin wrote:
A1TEC wrote:
Haggis and chips up here Martin.
That reminds me, I meant to ask, what time of the year are you allowed to go hunting haggis anyway?
31st of February every year Martin. :rotfl:
A1TEC
ParticipantRe: Scottish Black Pudding
Martin wrote:
don wrote:
Can’t have the Scots thinking they have the exclusive claim on it can we
Is deep fried black pudding ‘n chips exclusive to Scotland too?
Haggis and chips up here Martin.

A1TEC
ParticipantRe: Scottish Black Pudding
That pic looks like some thing that you find in the gutter after a friday night out Steve.
A1TEC
ParticipantRe: Beko WM6167
Carbon brushes gone, machine only 15 months old, never came across a first set wearing out that quick.
A1TEC
ParticipantRe: NEFF C57M70N0GB microwave
Any error codes?
November 24, 2013 at 2:39 pm in reply to: Smugged up or getting one over on obnoxious customers #405085A1TEC
ParticipantRe: Smugged up or getting one over on obnoxious customers
Had a similar experience with a landlord, got the call to say w/m tripping electrics and a burning smell.
He did not want to waste time and wanted a recon machine that i done a lot of back then. I did suggest that i should look at the machine in case of some thing simple but was told just install the recon machine.
I did as requested and fitted my machine and took the problem machine away.
The problem w/m was a bosch with burned pin on the moulded plug top.
Put a new plug on it and away it went, so sold a £125.00 hotpoint and got a £400.00 Bosch into the bargain.A1TEC
ParticipantRe: What Made You Walk
Went to one years ago when i worked for home care, bit of a ruff area but not all bad.Walking up to the front door all looked well.
Rung the door bell and then i heard the dogs barking, don;t mind dogs so no problem there. Then the door opens and the smell of dog shit and piss would have knocked you on your back!
The lady of the house said come in and excuse the news papers from the front door all the way along the hall and into the kitchen, all of which were covered in the afore mentioned waste.
I got as far as the washing machine but was not prepared to knell down on the floor let alone pull it out, but the smell was turning my guts so i made my excuse to return to the van and called the office, they agreed so i left.A1TEC
ParticipantRe: Whats the most annoying thing customers do?
funkyboogy wrote:the cleaning crew . oh ill just clean that up whilst its out
you go to van come back and there’s a snails trail of dog hair clumps of hair and biscuit and all sort of other crap just swept right over the area you are working in ..and a nice we mountain of crap right where your feet are going to be.
if your lucky they may have bleached it as well ..
You are so right :rotfl:
A1TEC
ParticipantRe: Hoover WMF147DF
Cheers Martin, much appreciated.
John.
A1TEC
ParticipantRe: Hoover WMH147DF
Just noticed my typo, model is WMH147DF :boops:
Would appreciate any info on wiring lay out etc.John.
A1TEC
ParticipantRe: Proline M2020 microwave display faded out
Think you would struggle to get parts for that oven now. 🙁
-
AuthorPosts
