Forum Replies Created
-
Posts
-
Re: Advice on changing brushes
Sorry for the late response. I don’t visit too often.
I don’t know the exact model, as I recently binned the plastics, but it looked identical to this.http://www.ebay.co.uk/itm/Zanussi-1600- … 4d0e3f72ac
The motor has a shaft on the end which is used for the belt drive.
I cut mine off with a dremmel. Ensure you mask the motor off first, so no metal filings and debris can’t get in etc.Mine developed another fault this weekend. Upon close inspection, I think it’s because I left the starting capacitor attached to the Zanussi motor.
The PCB also has a starting capacitor, so you might want to consider cutting the one out on the Zanussi motor.Re: Servicenet
Hi Martin
And concerning ANY charges that they wish to levy,They MUST advise the customer of any and all charges before carrying out any work what so ever and also give a 14 day cooling off period.Unless a declaimer is used and issued and returned,Which it hasn’t and the customer has stated that he wasn’t even advised of what the costs would be what so ever which is silly of him to even consider going ahead with GLG (” Go Local Group ” )(Assumed ).
They didn’t even ask what model it was..lolBryan
Re: Liebherr fridge/freezer KDNves4642 problem
Hi
It sounds like either one of the sensors or the defrost heater has failed.
We cover the middx area and our email is service@ffrservices.co.uk and we are liebherr authorised engineers.
Bryan
Re: Servicenet
Not a bad idea. Mind you, ServiceNet then charge a £12.50 cancellation fee taken automatically from their credit card. So at least they will still profit from their referral service.
Only if it isn’t cancelled within 24hrs.
Bryan
Re: Pulling machines out on board
philfish wrote:Has anyone attempted to use wheelchair ramp for their work van to load machine onto it rather than hoist it up?
I brought a wheelchair lift for £50 off ebay. Bolted it to the floor of the van, cable back to the battery with a fuse and isolation switch
job done! Lifts 300kg fits me and a machine on it is an absolute god send!!Phil
it would be good to see a pic of this set up?Re: Servicenet
Hi All
There is always the other option.. Take the call, Phone the customer, get them to allow you to do the work direct with the customer. Tell the customer to cancel the call. Simples
Bryan
Re: Connect a cable to fridge timer for compressor
Or there is the option to buy a large lump of ice and put it into a wooden box to keep things cool. 🙂
Bryan
Re: USA: EPA Warns Against Use of Refrigerant Substitutes ..
kwatt wrote:Wait till they get a load of R600a!
K.
It’s the same as care 40 other than 40 is propane and R600a is butane .
They still haven’t recovered all the money they spend developing R134a
Bryan
Re: Team meeting
To all of you who put me in harms way a big thank you
Had nothing to do with us..you didn’t need any help 😛
Bryan
Re: Connect a cable to fridge timer for compressor
Ok then buy an absorption fridge freezer..simple.
then you have the quietness you want.
Bryan
Re: Creda Concept Solar Plus 48319 – Main Oven not working
You could also bypass the auto cook facility
Bryan
Re: Bosch KUR15440GB
The yellowing can only come from external source but would not cause any hygiene problems
Bryan
