admin

Forum Replies Created

Viewing 15 posts - 151 through 165 (of 12,518 total)
  • Author
    Posts
  • in reply to: Ceramic Hob installation advice please… #449342
    admin
    Keymaster

    Re: Ceramic Hob installation advice please…

    Personally I would advise you to get an electrician out to do it.

    Bryan

    in reply to: whirlpool S20D not working #449315
    admin
    Keymaster

    Re: whirlpool S20D not working

    Hi

    Then if you don’t have a meter and or don’t know how to use it then it’s an engineer visit.

    Bryan

    in reply to: Samsung Ice level lever DA66-30163B for SR-S2028CSS #449323
    admin
    Keymaster

    Re: Samsung Ice level lever DA66-30163B for SR-S2028CSS

    Hi

    It’s a complete ice maker you need as the arm doesn’t come on its own.

    Bryan

    in reply to: whirlpool S20D not working #449313
    admin
    Keymaster

    Re: whirlpool S20D not working

    Hi

    Turn the whole appliance off at the plug and leave off for 48hrs with both doors left open. After 48hrs dry the insides with a towel and close the doors and switch back on and see how you get on then.

    Bryan

    in reply to: ISE washing machine wanted #449271
    admin
    Keymaster

    Re: ISE washing machine wanted

    Hi Jonstobbs7

    We have what was left of the ISE stock

    E mail me @ service@ffrservices.co.uk

    Bryan

    in reply to: How possible at the price? #449259
    admin
    Keymaster

    Re: How possible at the price?

    Qualtex selling direct to the public.

    Very rarely use a spares account as its cheaper than trade.

    Bryan

    in reply to: Upper Element support clip Logic Oven LBFANW10 #449197
    admin
    Keymaster

    Re: Upper Element support clip Logic Oven LBFANW10

    Hi

    Looks like it and you just squeeze the open ends into the hole in the ceiling of the oven.

    Bryan

    in reply to: GENERAL ELECTRIC ICE MAKER #449018
    admin
    Keymaster

    Re: GENERAL ELECTRIC ICE MAKER

    Hi

    We hold them in stock.

    Bryan service@ffrservices.co.uk

    in reply to: Damage to air conditioner #447810
    admin
    Keymaster

    Re: Damage to air conditioner

    Hi

    It isn’t actually physically damaged… What your looking at is fins that will bend with a slight touch..they are made that way.You can even use a comb to straighten them if you bend them whilst refitting the filter assembly… Even a brand new one on the production line will have the same damage ( But its not damage ). Your making a mountain out of nothing.

    Bryan

    in reply to: Damage to air conditioner #447808
    admin
    Keymaster

    Re: Damage to air conditioner

    Hi

    It will NOT affect it what so ever and will work for years with that damage.

    Bryan

    in reply to: samsung RSH1DBBP fridge dain blocked #448960
    admin
    Keymaster

    Re: samsung RSH1DBBP fridge dain blocked

    Get yourself a wallpaper stripper and don’t use the plate just point the hose down the drain. then remove the one way rubber valve and leave it off.

    Bryan

    in reply to: Salt indicator light #449001
    admin
    Keymaster

    Re: Salt indicator light

    Hi

    Use a spoon and stir it to mix the salt that may help.

    Bryan

    in reply to: Samsung Auto 4E Error Code? #448813
    admin
    Keymaster

    Re: Samsung Auto 4E Error Code?

    might help.

    http://prntscr.com/ftrjd6

    Bryan

    in reply to: New Cooker problem #448821
    admin
    Keymaster

    Re: New Cooker problem

    hi

    Check your installation wiring.

    Bryan

    in reply to: Lump of ice #448792
    admin
    Keymaster

    Re: Lump of ice

    Hi

    This will be caused by a slight insulation failure or where the suction pipework is too close to the liner. If it’s out of warranty then it will continue to work quite happily for years to come. All you need to do it knock it off every now and then.

    Bryan

Viewing 15 posts - 151 through 165 (of 12,518 total)