[admin]

Re: Smeg A4 120cm Opera dual fuel

Dill

My reply was due to experience when installing the Smeg range cookers and not having them sitting on a shop floor. In real life cabinets are not 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} square and may show 1200 at the top and rear top but that’s not the case of size at the bottom or bottom rear.

Range cookers if squeezed into a gap then twist and doors go out of alignment.

Reliability.. Heat and PCB’s never mix well. Over engineered to carry out a simple function.

But as a retailer I am sure that you will happily supply this customer the range cooker,order it deliver it and when it doesn’t fit collect it and refund all the money they have paid as you seem to know more than the manufacturers about size requirements.

As for replying just because you did.. You must have a complex.

Bryan

[admin]

Re: repairs4you

:eeek: web site looks naff….! give them a big miss , a bit like the other shower of sh!t, go local. 👿

just build up your own customer base,

you can stay at home and earn nothing, dont need to drive around and do it for them

canufixit

[admin]

Re: Smeg A4 120cm Opera dual fuel

Hi

It WON’T fit and if you order it the retailer does not have to take it back.

It is the correct size given. Personally the rosiers is a far better built cooker and will outlive the Smeg.

Spend a couple of hundred getting your cooker back into functionality.

Far to much electronics have been fitted to the Smeg range cookers.. Since when do you need a A4 size PCB With about 9 relays and electronics to roast a turkey ?.

Bryan

[admin]

Re: LIEBHERR CUN3031

Coolectric Newport pagnell

[admin]

Re: Retail or Industrial unit ?

thanks Martin, please pop in and join us for a glass of bubly.

Simon

[admin]

Re: samsung F/F rs 21fcns

Hi

If you have double checked and are absolutely sure the fans are ok then the only thing that controls them is the main PCB.

We have them in stock.

samsung@ffrservices.co.uk

Bryan

[admin]

Re: Rosieres 4040DB

Hi Jude

The centre ones are replaced by partly removing the centre munion. But beware if you pull it forward and bend it too far then it’s a total strip down of the whole cooker ass to straighten it. This job isn’t for the light hearted and just beware of keeping your fingers when putting the hinges on.

Bryan

[admin]

Re: liebherr tech on f/f required

If its integrated then the door maybe hitting the carcass before the actual door seal fully.

Check as previous advised.

Bryan

[admin]

Re: general electric american side by side getting too cold

Hi

The normal problem is that the bottom of the fridge section gets too cold and starts to freeze the salad containers.

This will require a ASM assembly which we hold 3 in stock and as the GE service has now ceased as such you will have great difficulty obtaining the parts.

The arm on the ice maker was modified and I believe that we do or did have some of the arms left.

Service@ffrservices.co.uk

Bryan

[admin]

Re: repairs4you

Hi

The address given is part of an industrial estate and not an actual property.
Address:
Office
66-14 George Street
Birmingham
West Midlands
B12 9RG

closest to the name is at office 67 15 George st.

But the registered office is different again B11 1DS which shows up next to home appliance warehouse or total solutions & co.

Hmm. have they supplied any other company details ?

Bryan

[admin]

Re: Rosieres 4040DB

Hi

Not an easy job unless you’ve done a few.Manufacturers say sides off but you can do it from the front if you can get in.. different ones you can, some you can’t.

Bryan

[admin]

Re: liebherr tech on f/f required

How many beeps ? For the alarm.

If its integrated then the door maybe hitting the carcass before the actual door seal fully.

Bryan

[admin]

Re: FocalPoint job offer?

Hi

No there wont be enough to start a new business but it’s extra work. No manufacturer or work provider will give you enough work to start a new business and I would advise anyone just to prioritise a work provider as they will have NO qualms with dropping you without a second thought.

Have several small accounts.

Bryan

[admin]

Re: In search of the fourth cord

Logged in this morning and had a quiet chuckle reading this one.

washing-machine-forum/samsung-wf0804w8e-bubble-wash-machine-problem-t71691.html

Anyone on here got a meter to test for low bubbles

Sorry.. Couldn’t resist it.

Bryan

[admin]

Re: Samsung WF0804W8E Bubble Wash Machine Problem

Hi

The best way to resolve this is to ask SAMSUNG for them to supply how they measured the bubbles, And ask for a service visit and ensure that SAMSUNG have supplied the engineer with the latest bubble meter.

Bryan

[Author]

Posts