Forum Replies Created
-
Posts
-
Re: Do Samsung check if agents are refrigeration trained
If the fuse board mod hadn’t already been fitted, Samsung would replace the compressor foc
Not always true,It depends if you scream loud enough. But concerning do they check if your refrigeration trained or to what standard ..NO
Bryan
K9212l n/r 82/081141043
Hi
Standard liebherr evaperator sensor kit.Meile is liebherr in a cloak.
Bryan
Re: Samsung RSH1NBRS fridge freezer
The fuse on the main PCB had blown but changing it has made no difference.
Which fuse ? Each connector and wire gives you what that particular wire does on a RSH1 PCB so it is a easy trace of the faulty component.
Go back to it and look at the pcb to see where the wire goes to.Hopefully you didn’t just change the fuse and then leave it running after you left !! :eeek: for the customers sake.
Bryan
Re: Samsung RS20 – R600a gas problem
it requires that the fridge defrost sensor is moved from the top of the evaperator to the very top lh pipe coming in on the left side this will allow the defrost heater to stay on a little longer to defrost the evaperater
Nope boschman.This is a RS20 not RSH1.
The fault would probably be the defrost sensor which is located in the freezer section as this model is a single cooling unit.It could also be the bottom defrost heater not the evaperator one.These are really the only fault that this model has.
Bryan
Re: Engineer in Herts/close to Hitchin?
Hi
We cover that area.
Service@ffrservices.co.uk 08445048326
Bryan
Re: Samsung RSH1 fault codes
Have you checked the refrigerant or compressor system if the fridge is working and the freezer isn’t frosted over ?
This fault won’t show any code up unless there is an actual electrical fault.
Bryan
Re: Misleading?
Whats the best approach to get them to change it?
Do you think its correct of them to say ‘no call out charge’.
Jackel said it was correct as it may not be a call out charge but a diagnosis / labour fee.Totally different but allowable and legal.
Bryan
Re: Samsung RS20 – R600a gas problem
Hi
Anyone working with R600a should be F GAS registered for the safe handling of refrigerants..
Incorrect as R600a is not governed under the F gas scheme.
The only way to correctly make sure if the refrigerant is to weight it in unless he knows what he is doing which it seems he doesn’t.Over charging on R600a is dangerous and it can ruin your compressor.
I would suggest you get another engineer who does work with R600a and get the engineer to foot the bill for the degas and regas.
Bryan
Re: Washing machine fires
These days there are very few incidents of ‘modern era’ machines failing so dramatically that they can catch fire. Thanks largely to the fact that most houses have ECB’s/RCD’s and they cut off the power long before there’s any chance of a serious fire taking hold. And the fact that EU regulations on machine safety has been improved no end since the 1990’s even.
Not quite true martin. Due to the appliances being made by accountants and the manufacturers opting for the cheapest product available they cut corners.
In the last 5 years I could name at least 3 manufacturers that has had appliances go up due to faulty components which has nothing to do with how the appliances are used or installed.
bryan
LEC fridge
Well there’s an easy option to replace it. Get a length of cable mini trunking and make another one. Simples.
Bryan
