Alanj

Forum Replies Created

Viewing 15 posts - 496 through 510 (of 757 total)
1 2 3 … 33 34 35 … 49 50 51
  • Author
    Posts
  • February 25, 2008 at 10:42 pm in reply to: Smeg A1 range #243769
    Alanj
    Participant

    Re: Smeg A1 range

    Just as a matter of interest, do you guys have a copy of the Smeg disc?

    Alan

    February 25, 2008 at 10:14 pm in reply to: Smeg A1 range #243766
    Alanj
    Participant

    Re: Smeg A1 range

    Hi Clive,

    do you have the part number for the new switch(commutator)?

    Alan

    February 19, 2008 at 5:21 pm in reply to: Whirlpool DWF416 integrated Ikea dishwasher #243615
    Alanj
    Participant

    Re: Whirlpool DWF416 integrated Ikea dishwasher

    Hi Robbieh,
    just checked the Sios disc, and it does have a Feeler NTC Part No 481228268012. £27.00 + vat Masterpart or £28.29 + vat Connect.

    Alan

    February 19, 2008 at 5:13 pm in reply to: Whirlpool DWF416 integrated Ikea dishwasher #243614
    Alanj
    Participant

    Re: Whirlpool DWF416 integrated Ikea dishwasher

    Hi Robbieh,

    does it have a temperature sensor in the bottom of the sump? It usually twists out with a half turn. Probable culprit 😈 ❗

    Alan

    February 12, 2008 at 1:41 pm in reply to: hotpoint condensor dryer stops #242642
    Alanj
    Participant

    Re: hotpoint condensor dryer stops

    Hi Abbotts,

    is the pcb mounted on the right hand side of the machine at the top?
    Had one like this a while back and it was the pcb.

    Alan

    February 12, 2008 at 1:35 pm in reply to: Ignis D/w no heat #243056
    Alanj
    Participant

    Re: Ignis D/w no heat

    Hi Steven,

    have you checked for broken wires in loom going into base from door? Where it hinges.

    Alan

    January 23, 2008 at 3:30 pm in reply to: Bosch W/M WFO2465GB/01 #240789
    Alanj
    Participant

    Re: Bosch W/M WFO2465GB/01

    Thanks for the reply Martin.The bearings are just squeaking at the moment and no movement on the shaft, so might be alright to do bearings only.

    Alan

    January 10, 2008 at 3:57 pm in reply to: hotpoint d/w #239231
    Alanj
    Participant

    Re: hotpoint d/w

    dealdd,

    have you checked the door switch ❓ If it has the old style bosch switch they were prone to over heat on load ❗ There is a mod kit too. 🙂 Part no 1800544.

    Alan

    January 9, 2008 at 2:31 pm in reply to: PABl dw45bi leak #238879
    Alanj
    Participant

    Re: PABl dw45bi leak

    Hi Paul,

    not familiar with this appliance, but possible lower spray arm faulty ❓

    Alan

    December 20, 2007 at 10:58 pm in reply to: Electrolux EOB5630X oven #237602
    Alanj
    Participant

    Re: Electrolux EOB5630X oven

    Hi Andy,

    Those 8996619267611’s are very common to go on the AEG ovens.Must be a similar breed. Glad we could be of help 😀

    Happy Xmas
    Alan

    December 20, 2007 at 10:13 am in reply to: Electrolux EOB5630X oven #237599
    Alanj
    Participant

    Re: Electrolux EOB5630X oven

    Hi Andy,
    probably the 210 one. The 90 one looks like it controls the cooling fan on top of oven. Sorry didn’t look properly at TDS disc before.LUX 3302934017 from Masterpart £13.44 + vat. Have you taken the oven out and run it, till it cuts out ❓ You could then test the Klixons to see which one has cut out. ❗

    Alan

    December 20, 2007 at 9:22 am in reply to: Electrolux EOB5630X oven #237597
    Alanj
    Participant

    Re: Electrolux EOB5630X oven

    Hi Andy,

    I would say it’s probably the Klixon that’s faulty.
    🙂 LUX 3302081058 THERMOSTAT,KLIXON,90 GRAD from Masterpart £3.69 + vat.

    Alan

    December 19, 2007 at 8:06 pm in reply to: Diplomat D/W ADP8234 #237549
    Alanj
    Participant

    Re: Diplomat D/W ADP8234

    Hi Brian,

    could be crud between sump and tank causing overflow ❓ .

    Alan

    December 18, 2007 at 10:37 pm in reply to: indesit widl102 clicking relay #237438
    Alanj
    Participant

    Re: indesit widl102 clicking relay

    Hi Alro,
    I would call EMW for a new module.

    Alan

    December 18, 2007 at 10:35 pm in reply to: Leisure cooker mod RM10CRS Ser No. 10069207 #237426
    Alanj
    Participant

    Re: Leisure cooker mod RM10CRS Ser No. 10069207

    Hi Ashby,

    is the thermostat regulating ok? 😳 could be the element is not cutting off?

    Alan

  • Author
    Posts
Viewing 15 posts - 496 through 510 (of 757 total)
1 2 3 … 33 34 35 … 49 50 51