[alexa]

If your bottom two spin lights didn’t come on (spin hold & slow spin) and your wash lights didn’t extinguish prior to the fault readout your board has had it. If they did extinguish and you did get the readout then the fault code acts as a guide. Ive posted you the possible causes. Could be either board.

[alexa]

I’m a Kiwi. 😈

Kwatt wrote:I knew we’d asked you to be mod for a reason

What reasons would that be? (other than annoy)(c’mon penguin45 Why me?)

Never admit defeat (love means never having to say your sorry 😆 )

Yeah I’d love to help with further suggestions/rewrites

It’s a fact that you cannot proof read your own writings.

The mistakes you made you will pass over.

Wrong? Idiot? Dumb? NEVER!

crucifies? :worthy: Godlike!!

[alexa]

345 unanswered posts.
Saw an Asea benchtop one and thought I’d reply.
What’s the easiest way to know where he’s from?

[alexa]

You need to push the advance button to accesss level 3 fault code.
Have emailed you the readout for the fault code you indicated.
If the machine won’t turnoff then possibly moisture or corrosion on switches.
Machines have been known to turn themselves back on and these require a new board.

[alexa]

Where do you reside?

[alexa]

Spare Parts button has no content 😳

Continet in internationl spelt wrong 😳

Picky picky picky

[alexa]

eastlmark wrote:Thanks all,
PO box hopefully should solve that

P. O. Box

OFT surely wouldn’t allow that?

Street address req’d on all ads and correspondance?

Home address required so that your open all hours to all sorts.

[alexa]

Cause Martin would realize that my post referrred to a different guy

[alexa]

How many of you do the OFT not talk too?????

Bureaucracy

Bah/humbug (tired)

[alexa]

Check im out?

Strip search?

Best wear clean underwear then.

Or are there some pre requisites designed to exclude certain people.

[alexa]

Your’e right martin.

3 ways to increase your profit:

Charge more
Work more
Reduce overheads

Premises are a burden and then the additional cost of staffing, stocking and servicing them.

We are not here to save the world.

Enjoy your new found freedom Mark

[alexa]

PM to peeved

You appeared to emailed me fault code 11
I sent you the readout for this fault code
Has that helped

[alexa]

Is that fault code 11?
Have emailed you the readout

[alexa]

peeved wrote:
Thank you again
There is some interesting info on the stuff you sent me, firstly my
machine had water in the tub when I fitted the new motor control.
Next I have done a diagnostic ( level 3 ) and the result I got back is
“11”.????
Should I sit down to read what you are going to tell me ?
Thanks again.

[alexa]

Search in Google

“carbon Brush manufacturers”

[Author]

Posts