Forum Replies Created
-
AuthorPosts
-
ali-p
ParticipantRe: INDESIT DISHWASHER A10 FAULT CODE
Many thanks – I will check that out!
Alister
ali-p
ParticipantRe: Servicepower
Seems to be a lot of politics that go with this crowd, but from our experience they are ok.
Closure is online through a not-too-bad web portal, and payment roles in like clockwork.
my advice, listen to the man & give it a try if it sounds ok for you.
most of the calls we get are inspections and that suites us just fine
ali-p
ParticipantRe: Fridge too warm on Whirlpool Fridge/Freezer
Although hard to bear, its the right choice
We may be able to supply a new one at a compettitive price compaired to high st & can deliver anywhere (and collect old if req)
Dolphin Appliance 0870 766 9453
Best of luck!
ali-p
ParticipantRe: fisher & paykel dish drawer
check rinse aid & salt levels, if you dont get a fault code thrown up its lightly to be one of those two
ali-p
ParticipantRe: Whirlpool again
part numbers posted on your other post in spares forum
ali-p
ParticipantRe: American style Whirlpool fridge freezer
Hi,
Its all bad news I’m afraid – you must change both front and back boards now there are no other options!
Back – 481221778192 £74.79 + vat + delivery
Front – 481245228617 £122.79 + vat + deliveryDelivery for these two would be about £7 by courier or half that by post.
delivery usually 3-4 days
0870 766 9453
ali-p
ParticipantRe: LG work
Ok guys,
I think that has covered my queries
and phew, I’m glad I asked!
Many thanks
ali-p
ParticipantRe: Call / Appointment / Customer Manager
astro?? 😆
ali-p
ParticipantRe: fisher and paykel
ASD on 0113 393 6680 – they are the F&P guys
ali-p
ParticipantRe: baumatic gas oven door seal
AAAAHHHHHHHH!!!!! 💡
thanks Dave, that helps!
ali-p
ParticipantRe: ignis oven door handle
Hi all,
we can possibly help – there are other handles still available if you dont mind a change of style (and sometimes its for the better!)
No iron – clad guarantees, but its worth a try before you bin a perfectly good oven!
PM (private mail) me for more info
ali-p
ParticipantRe: Whirlpool Oven Not Heating Up
Hi Nik,
Pull the plug out
check the plug is out!
Element is accessable from inside (you need to be very careful pulling away from rear wall as if the wires dont come through, you have to take the back off)
Part is available, £32.41 + vat and p&p
call us on 0870 766 9453
ali-p
ParticipantRe: Who designs Whitegoods ?
Sorry guys, dont even try
In a previous life, I met several designers and they all have a very clear view of the world – their product is great, its the customers that cause problems. Engineers do not come into the equation
Great examples on being asked for feedback on diswahers:
– asking for the sharp edges to be removed and the response was no, as only 10{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} ever fail – its not cost effective. next time you loose a couple of fingers, at least you can be safe in the knowledge that 90{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the products will not hurt you!!!
– asking for the spray arms to be made bigger so the food can be cleaned out, to be told that the customer must wash dishes first as even a grain of rice must not go in…. and the next step was SMALLER arms to reduce water consumption.and so on, i am still in theropy
August 23, 2005 at 3:34 pm in reply to: Whirlpool DWFB10 stopping with beeps and 4 x LED flash #145617ali-p
ParticipantRe: Whirlpool DWFB10 stopping with beeps and 4 x LED flash
that will be an ‘F4’ – draining failure
does the appliance drain out fully?
If no – check filters + drain hose (also if conected to sink the spiggot) for blockages & kinks
If yes, could be the level sensor jammed up with grease (happens ifyou use the cooler washes a lot). Try pouring some hot (70 deg) water into the base – but not too much, only 1 inch over the filter!
if neither works – call an engineer!
ali-p
ParticipantRe: Whirlpool SxS filters
Yes Dave, Part number is 4812 817 29632
-
AuthorPosts
