[ali-p]

Re: whirlpool commercial dryer

CHECK FOR IN LINE FUSE ‘HIDDEN’ IN LOOM RUNNING ALONG INSIDE TOP OF CABINET – 6.3 AMP, 20mm

GOOD LUCK!

[ali-p]

Re: Wholesaler Sought.

We can help – UK delivery & a sensible price – only snag is I cant check stock until later today

Check your PM

Alister

[ali-p]

Re: Baukneckt Dishwasher

mmmmmm,

Sounds like the door hinges are slightly bent – when the door is fully open it should be horizontal – if it is angled down (even slightly) the hinges are bent. Always worth checking the top basket isn’t at fault as well – if its sticking out it stops the door closing (try removing it completely and push the runners back in)

[ali-p]

Re: Whirlpool AWM8163

Hi Byran,

One to look for is the small lead between the timer & user board – we have a lot of success just removing, turning it around and re connecting (the plugs are the same both ends)

Dont know why, maybe its just a bad connection, but it seems to work!

[ali-p]

Re: hoover timer req

Thanks Jim, cust will be happy now!

Alister

[ali-p]

Re: AWZ541/3 Whirlpool Condenser Dryer Help !

As above, the only other thing to try is the appliance may have gone into overfill – you have emptied the bottle, but the sump is still full.

Solution is to set timer to near end – look for the bucket symbol with the arrow pointing down (and I think the early versions were missaligned so it may be one click before or after)

If yiou hit it right, pump should run.

Only other that comes to mind is the float in the sump (front right corner)goes heavy & shrinks if the use certain body creams, worth a look (the float controls the microswitch that brings on the light).

Good luck!

[ali-p]

Re: DIPLOMAT ADP8322

Sorry Dave,

I guess you must get fed up with us going over old ground…..

The info is great, I wont ask (about this one) again!

Thanks,
Alister

[ali-p]

Re: DIPLOMAT ADP8322

Thanks dave!

any ‘common’ reasons for the safety pressostat to trip?

Alister

[ali-p]

Re: MAGNET cooker hood PARTS

Hi Brett

Its a Whirlpool motor p/n 481936118249

We have it in stock at £60.81 + vat – we will deliver free

0871 288 2045

Alister

[ali-p]

Re: DIPLOMAT ADP8322

AAAARRRGGGGHHHHHH

Engineers…… model number should have read ADP8242

sorry Dave!

Any ideas?

[ali-p]

Re: Whirlpool AWM325 Bearing Hub

Hi Mick,

We have the hub in stock, I will throw in the 4 replacement bolts (always a good idea to change those as well!)

delivery should be a couple of days – credit card line – 0871 288 2045

Thanks
Alister

[ali-p]

Re: INDESIT PART NUMBER REQUIRED

Many thanks!

[ali-p]

Re: Whirlpool American F’Freezer Fault code?

Hi,

Yep, its the filter indicator – F99 is a new filter, F1 is a filter that needs replacing – its all done on a time basis (6 months)- if the water dispenser is not used it still counts down

From memory, press & hold ‘OK’ to reset after replacing the filter

If you need any filters, let me know by pm

Thanks

[ali-p]

Re: White Knight tumble dryer

Hi,

Please supply the tumble dryer model number – should be a couple of digits & 3 numbers ie CL767

Thanks

[ali-p]

Re: whirlpool (Ikea) DWF416W Flow meter

Also be careful with the wires between the c/b & the flowmeter card, we sometimes get problems there

[Author]

Posts