allan73

Forum Replies Created

Viewing 15 posts - 46 through 60 (of 497 total)
  • Author
    Posts
  • in reply to: White Knight C77AW condensation problem #413024
    allan73
    Participant

    Re: White Knight C77AW condensation problem

    It is indeed a smallish utility room. I will endeavour to find out if they are using it with the door closed.
    His washer is a Bosch 1400 so should be ok, however I can’t say which programmes they use it on.

    Thanks
    Allan

    in reply to: White Knight C77AW condensation problem #413022
    allan73
    Participant

    Re: White Knight C77AW condensation problem

    The dryer is in a utility room adjacent to the kitchen, reasonably warm this time of year I would guess.
    What kind of ventilation would be required for a condenser dryer ?
    I couldn’t see anything specified in the instructions.

    Allan

    in reply to: Electrolux ESL 4114 no circulation #412867
    allan73
    Participant

    Re: Electrolux ESL 4114 no circulation

    Cheers Colin

    in reply to: Electrolux ESL 4114 no circulation #412865
    allan73
    Participant

    Re: Electrolux ESL 4114 no circulation

    Pnc : 911631002

    Allan

    in reply to: Electrolux ESL 4114 no circulation #412863
    allan73
    Participant

    Re: Electrolux ESL 4114 no circulation

    PS..also noticed door can be opened with drain pump running at beginning of cycle. Is this normal for this model ?

    Allan

    in reply to: Hotpoint hob e22 #412488
    allan73
    Participant

    Re: Hotpoint hob e22

    Strange..there is a code I’ve seen it myself now. Also a nasty crack in the glass so I’m guessing it’s probably a write off.

    Allan

    in reply to: Hotpoint hob e22 #412486
    allan73
    Participant

    Re: Hotpoint hob e22

    Managed to obtain the model number now : E7134

    in reply to: Bosh WTW863s0gb/11 container full #412550
    allan73
    Participant

    Re: Bosh WTW863s0gb/11 container full

    Thanks for the reply Paul.
    How quickly do these things warm up ? I ran for a while but hardly any heat in the drum ?

    Allan

    in reply to: Bosh WTW863s0gb/11 container full #412548
    allan73
    Participant

    Re: Bosh WTW863s0gb/11 container full

    Mmm..did cross my mind to point them in Bosch’s direction.
    Looks a bugger to get into.

    in reply to: Hotpoint hob e22 #412485
    allan73
    Participant

    Re: Hotpoint hob e22

    Anyone ?

    in reply to: Hotpoint WT721 intermittent leak #412481
    allan73
    Participant

    Re: Hotpoint WT721 intermittent leak

    I also have changed Hotpoint dispensers due to leaking Iadom, hence my post. I now recall they were the swing out style units.

    Allan

    in reply to: Hotpoint WT721 intermittent leak #412479
    allan73
    Participant

    Re: Hotpoint WT721 intermittent leak

    When I say lower, I mean lower the feet to raise the machine slightly at the front.

    Allan

    in reply to: Hotpoint WT721 intermittent leak #412477
    allan73
    Participant

    Re: Hotpoint WT721 intermittent leak

    The pull out draw is nice and clean, as is the sump.
    I’ve already dropped the front legs slightly and lowered the water pressure a little so I guess I’ll need to go back and take another look.

    Allan

    in reply to: Amica AWE512L door gasket #411953
    allan73
    Participant

    Re: Amica AWE512L door gasket

    Found it.

    in reply to: Amica AWE512L door gasket #411951
    allan73
    Participant

    Re: Amica AWE512L door gasket

    Thanks IADOM, I searched the mod number and the seal didn’t come up. I’ll take another look.
    Allan

Viewing 15 posts - 46 through 60 (of 497 total)