[alro]

Re: hoover HNF3147-80 3100636 wont spin but washes ok

tried a selector machine still same fault looked at rectifier no sign of damage as machine washes ok but will not spin dont suspect rectifier now i suspect core board any help will do cheers alro

[alro]

Re: hoover HNF3147-80 3100636 wont spin but washes ok

why should it wash ok but not spin cheers alro

[alro]

Re: ignis ADL934S 854593415750 3 FLASHES ERROR

grenal, pulled and check wiring at base of door area on bend no cracks or broken wire cheers alro

[alro]

Re: Hoover DYN7164 310051781227 motor stammer

gents motor faulty fitted new one all ok
old motor reading same as new motor but it was no good just stammered thank all for replys cheers alro

[alro]

Re: Hoover DYN7164 310051781227 motor stammer

Yes fitted 49027632 same fault

[alro]

Re: Hoover DYN7164 310051781227 motor stammer

fitted new module still motor make a loud humming noise and stammer or judders but will not rotate what am i missing to check any help please cheers alro insulation on motor tested ok and reading on winding there need to know what reading should be

[alro]

Re: indesit DIS04 fills over night

but why should the pump only run just to empty the water out of the cavity then stop as thou its a timed pump out where as with water in base it would run untill you took the water out of the base?
cheers for the reply iadom machine works fine just the problem of water in cavity in a morning when the door is leaved a jar i think i will try a new water valve cheers alro

[alro]

Re: Morphy richard steam iron 330014

dave thanks for reply the stat underneath is made but there is a sensor probe in the top of the tank i wonder if thats it that senses the pump to come on cheers alro

[alro]

Re: Morphy richard steam iron 330014

yes iron hot but no water going into boiler tank so no steam will be made, put 240 on pump and pump works fine heater in tank and stat and thermal fuse ok suspect pcb but there is a sensor in top of tank not no what it does that why i need technical info cheers alro

[alro]

Re: Hoover DYN7164 310051781227 motor stammer

hI Gents still need help on this has no rectifier just a core board and DC motor any tech info would help so i can go back and test the machine cheers alro

[alro]

Re: Hoover DYN7164 310051781227 motor stammer

no checked pulley all ok motor stammers with no belt on
cheers alro

[alro]

Re: ZANUSSI ZWH7120P E20 SHOWING

thanks gent for file simon and electrofix

[alro]

Re: zdt12011fa 91153910700 overfilling

thanks dave cheers alro

[alro]

Re: ewx14450w 91460600102 door wont lock

Thanks Martin

[alro]

Re: zannusi td4212 916092302-01 poor drying

wilf blowing fine cleaned fan blade and vents cheers alro

[Author]

Posts