AMS

Forum Replies Created

Viewing 15 posts - 121 through 135 (of 463 total)
1 2 3 … 8 9 10 … 29 30 31
  • Author
    Posts
  • December 1, 2012 at 5:29 pm in reply to: Hotpoint TCL780 tumble dryer #385560
    AMS
    Participant

    Re: Hotpoint TCL780 tumble dryer

    Okay then, one-shot and cycling stat both good. Got continuity L and N all the way from plug to board. Any more suggestions?
    Thanks for all the replies so far btw.

    November 29, 2012 at 10:33 pm in reply to: Hotpoint TCL780 tumble dryer #385557
    AMS
    Participant

    Re: Hotpoint TCL780 tumble dryer

    Thanks Jim, I’ll check it out tomorrow.

    November 29, 2012 at 9:56 pm in reply to: Hotpoint TCL780 tumble dryer #385555
    AMS
    Participant

    Re: Hotpoint TCL780 tumble dryer

    Would that be on the element or the front one Jim?

    November 29, 2012 at 9:55 pm in reply to: Email invoicing #385566
    AMS
    Participant

    Re: Email invoicing

    I use Easy Invoicing software. You can download it from here:

    http://www.easy-invoicing.co.uk/

    Used it for years now, great program. You can trial it for 5 invoices and then you have to pay the princely sum of 20 quid if you like it. I have sung it’s praise on here before. Great support forum for it as well.

    Dave

    September 27, 2012 at 8:19 pm in reply to: CIC324AK foamed in sensor #287200
    AMS
    Participant

    Re: CIC324AK foamed in sensor

    C’mon guys (and gals),I know it’s an old thread,but someone must surely have the tech bulletin? Please 🙁

    September 26, 2012 at 8:26 pm in reply to: CIC324AK foamed in sensor #287198
    AMS
    Participant

    Re: CIC324AK foamed in sensor

    Hi all,
    It looks like I too have one of these to change. The tech info would be great if someone has a copy they could send me.
    P45, are you there? 😀

    August 8, 2012 at 9:06 pm in reply to: AEG L74850 #379084
    AMS
    Participant

    Re: AEG L74850

    Quick update on this. E31 sorted. The wires at the pressure switch plug must have been broken. One to watch.

    August 6, 2012 at 7:44 pm in reply to: AEG L74850 #379083
    AMS
    Participant

    Re: AEG L74850

    That is exactly the thing I was after. Thanks for that Criscold.

    July 17, 2012 at 1:22 pm in reply to: Belling 492ss 33100218 #378235
    AMS
    Participant

    Re: Belling 492ss 33100218

    082604989 or THM9363 from connect. Or even Hotpoint C00227130

    July 17, 2012 at 1:18 pm in reply to: Hoover VHV180 #378239
    AMS
    Participant

    Re: Hoover VHV180

    Should be just fine.

    July 12, 2012 at 10:30 pm in reply to: The speed of light! #378065
    AMS
    Participant

    Re: The speed of light!

    kwatt wrote:Shut it now, both of you.

    Hear, hear to that. I’m lucky to get 2 meg. 🙁

    July 12, 2012 at 10:20 pm in reply to: New Bosch dishwasher #378039
    AMS
    Participant

    Re: New Bosch dishwasher

    Could it be that the upper basket is not going back far enough? Try removing it and see if it helps.

    July 9, 2012 at 3:08 pm in reply to: Tecnik TKC1255/SS Top Element #377908
    AMS
    Participant

    Re: Tecnik TKC1255/SS Top Element

    No problem. I’ve found them pretty good for some of the more obscure elements. Phone them for a trade discount code.

    Dave

    July 9, 2012 at 12:54 pm in reply to: Tecnik TKC1255/SS Top Element #377906
    AMS
    Participant

    Re: Tecnik TKC1255/SS Top Element

    Is it anything like this?:

    http://www.elementman.co.uk/proddetail. … Tecnik3585

    June 19, 2012 at 4:26 pm in reply to: one for all the super smart sparkies on here #376784
    AMS
    Participant

    Re: one for all the super smart sparkies on here

    Oh, I see. So what are you going to do then John?

  • Author
    Posts
Viewing 15 posts - 121 through 135 (of 463 total)
1 2 3 … 8 9 10 … 29 30 31