Forum Replies Created
-
Posts
-
Re: Brand new Bosch on never ending cycle
How is the waste plumbed ?
Sent from my iPad using Tapatalk HDRe: BOSCH WTEB4102GB/03
There are fans but I would have though if they where blocked it wouldn’t dry. We have a Siemens one very similar and if I don’t clean the door seal and around the door bowl after every couple of time I get a similar problem
Sent from my iPad using Tapatalk HDRe: BOSCH WTEB4102GB/03
Have you checked all the seals, door seal, condenser seal, backplate seal etc. after all if its drying it must be escaping somewhere
Sent from my iPad using Tapatalk HDRe: Hotpoint DH53K fan sticking
Doubtful lubricating will cure it. Yes you have to attack it from front and back. Quite an easy job to fit one
Sent from my iPad using Tapatalk HDRe: Beko wm5100w washing machine 5kg tripping electrics
I would strongly recommend that you get someone in to do a proper insulation test on the appliance
Sent from my iPad using Tapatalk HDRe: Beko wm5100w washing machine 5kg tripping electrics
You need to have a megger to test individual parts
Sent from my iPad using Tapatalk HDRe: Built in appliances compromise your ability to repair
Never forget about 20 years ago a customer had a 96 series top loader and had dug a well so that the machine would fit under a hinged work top.
Was a work of art to get it outSent from my iPad using Tapatalk HD
Re: Hotpoint aquarius + (WMF760) – f11 fault
Does sound like a board problem. You could always get the board repaired. Emw electronics. I’ve used them a few times and are quite good
Sent from my iPad using Tapatalk HDRe: Built in appliances compromise your ability to repair
Worst thing is when they have thick wood flooring installed up the the appliance and left no play in the feet. Never make our lives easy
Sent from my iPad using Tapatalk HDRe: Bosch Model No SD13GT1B
If you take right hand side off, you will usually see if its the suppressor as it tend to show scorch marks
Sent from my iPad using Tapatalk HDRe: Kenwood dishwasher. Kdw243a
Martin wrote:Andy, I think you are new to UKW and probably didn’t realise that technical questions should always be posted in the Trade Technical forum not in General Trade. Sorry I can’t answer your question by the way other than suggesting Kenwood dishwashers should be put in the nearest skip. 😉
I am new mate. And yes I’ve suggested the scrap yard
Sent from my iPad using Tapatalk HDRe: Kenwood dishwasher. Kdw243a
This one got the brass stat. Have checked all these but new board still comes up with e3. Just wondering if it may be duff ??
Sent from my iPad using Tapatalk HD
