andysam

Forum Replies Created

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • April 16, 2013 at 12:46 pm in reply to: Candy GO1482 stain and 90 degrees flashin #393678
    andysam
    Participant

    Re: Candy GO1482 stain and 90 degrees flashin

    found out the above are ok its when it comes to the rinse cycle its not doing it and then flashes any quick way to put on a diagnostics test?

    December 9, 2012 at 11:41 am in reply to: hotpoint ctd00 #386091
    andysam
    Participant

    Re: hotpoint ctd00

    ive put a new cap on and it still does it

    November 8, 2012 at 8:40 pm in reply to: hotpoint ctd00 belt keeps snapin #384502
    andysam
    Participant

    Re: hotpoint ctd00 belt keeps snapin

    worn slight on one side cheers

    March 22, 2012 at 9:14 am in reply to: hotpoint ctd00 #371698
    andysam
    Participant

    Re: hotpoint ctd00

    cheers lads will check now

    February 25, 2010 at 11:11 am in reply to: bosch sgs43a32gb/01 #312980
    andysam
    Participant

    Re: bosch sgs43a32gb/01

    TRIED ALL THAT BUT STILL THE SAME PROBLEM, ANY OTHER IDEAS? CHEERS ANDY

    February 18, 2010 at 9:17 am in reply to: bosch dishwasher sd 15k1b #312330
    andysam
    Participant

    Re: bosch dishwasher sd 15k1b

    the en number is sgs43a32gb/01 and still tryin to work this site out. cheers

    January 28, 2010 at 12:05 pm in reply to: beko f/f frost free #310385
    andysam
    Participant

    Re: beko f/f frost free

    yep tried that getin live through stat return but comp wont start tried mains to comp bet still nowt

    September 7, 2009 at 12:37 pm in reply to: indesit kd3c1(w)/g ceramic electric cooker #296501
    andysam
    Participant

    Re: indesit kd3c1(w)/g ceramic electric cooker

    sorry cant use this that well the model number is indesit kd3c1(w)/g freestanding cooker

    March 17, 2009 at 10:20 am in reply to: sandwhich chiller #280427
    andysam
    Participant

    Re: sandwhich chiller

    cheers fellas i will try get out all refrigerant and put on a long vac hope it dsnt need a new comp just seen the price for a replacement wot a joke for a bit of metal.

    November 25, 2008 at 3:26 pm in reply to: comercial freezers #269167
    andysam
    Participant

    Re: comercial freezers

    cheers will do

    November 19, 2008 at 7:33 am in reply to: hotpoint wf440 flashing lights #268861
    andysam
    Participant

    Re: hotpoint wf440 flashing lights

    could you explain im a bit new to all this internet stuff. cheers

    July 20, 2008 at 1:19 pm in reply to: Hotpoint WF440 Flashing Lights #258076
    andysam
    Participant

    Re: Hotpoint WF440 Flashing Lights

    Thanks again – I’m pretty good at soldering – can I just replace the faulty relay? Or are you saying that the eprom is causing the fault?

    July 20, 2008 at 1:07 pm in reply to: Hotpoint WF440 Flashing Lights #258074
    andysam
    Participant

    Re: Hotpoint WF440 Flashing Lights

    top light – 1 and also on/off at other side of machine.
    Thanks

  • Author
    Posts
Viewing 13 posts - 1 through 13 (of 13 total)