[bazza500]

Re: Gorenje WDI 63113

Tachogenerator failure, motor blocked
– The wash programme is stopped for 120 seconds
– The error counter starts counting
– If the error counter counts 3 faults the error code F08 is displayed
– When the stop time is exceeded the programme begins again
If the error does not occur in the next 20 seconds the error counter is reset. The programme stops (in any
instance) and starts again in the same position. If the error occurs in the spin phase the programme will
start the whole spin sequence again from the start.
This error returns to the initial conditions if the error is reset.

[bazza500]

Re: Bush door seal

42020405

[bazza500]

Re: Lamona HJA8553 brushes

It will either be a Hoover or a Beko. If you have the serial number and product number I can help.

[bazza500]

Re: Prima spares?

Whirlpool part no. 481246279981. Rail cap.

[bazza500]

Re: Panasonic NA-14VA1 Bearings

You have to replace the rear drum assembly complete with bearings.

[bazza500]

Re: Bosch drum front.

Is that not the drum where you have to cut the lugs off to separate them and then you get a set of bolts with the tub seal to screw it back together?

[bazza500]

Re: Haus WQP12-9250G on/off switch

In stock at Connect, part number 674000300089

[bazza500]

Re: Beko DRCS-68W

Chances are there is something stuck in the fan or the fan is loose on the motor shaft.

[bazza500]

Re: LG F1256QD or Gorenje WA749 or similar?

I sell lots of Gorenje, and do their warranty work and I think they’re a very decent appliance. And with the 5 year parts and labour warranty you can’t go wrong.

[bazza500]

Re: Spelling Beer

I nearly had a heart attack, I thought the heading was spilling beer!

[bazza500]

Re: Belling oven stat

AMS wrote:It’s a 46TH1/J5, THM97 (Connect)

In that case the 2 numbers I gave you are correct as the genuine ones.

[bazza500]

Re: Belling oven stat

Not 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} on this one Jim but belling 082605018 hotpoint C00232309 (maybe)

[bazza500]

Re: Masterpart website un-usable

Site is unusable whichever version I use.

Every time I enter a part number it says “No stock”

[bazza500]

Re: Baumatic BT897SS

1250000034 and 1260000079

[bazza500]

Re: Bhwd129 error code

Hi Jim,

It is 1,3,& 4 lit and it says it’s a dryer heat fault but this error is coming up randomly on the wash cycle. I seem to remember something about the dryer thermistor on Hotpoint and Indesit washer dryers causing weird faults. Are these models prone to this?

Barrie

[Author]

Posts