bazza500

Forum Replies Created

Viewing 15 posts - 256 through 270 (of 1,916 total)
  • Author
    Posts
  • in reply to: White knight condenser dryer767c #400862
    bazza500
    Participant

    Re: White knight condenser dryer767c

    It is all done from the back. Takes a while but not too difficult.

    in reply to: dc24 & dc25 brush motor. #400401
    bazza500
    Participant

    Re: dc24 & dc25 brush motor.

    The cable between the body and ball breaks. Crap design really.

    in reply to: LG LD12BW5 inlet valve #400200
    bazza500
    Participant

    Re: LG LD12BW5 inlet valve

    Part number 5221ED1001A but cannot locate one.

    in reply to: Panasonic na147vb3wgb #399518
    bazza500
    Participant

    Re: Panasonic na147vb3wgb

    These were prone to this fault. If it comes back then loosen the interlock screws, push the lock as far as you can towards the door and tightened the screws as tight as you can. It only moves about 1-2mm but stops this fault.

    in reply to: Candy Grando cuts out? #399551
    bazza500
    Participant

    Re: Candy Grando cuts out?

    Brushes? Sounds like it’s cutting out as soon as the drum should turn.

    in reply to: Panasonic na147vb3wgb #399514
    bazza500
    Participant

    Re: Panasonic na147vb3wgb

    What error is it going to?

    in reply to: Help me buy a washing machine Panasonic? #399466
    bazza500
    Participant

    Re: Help me buy a washing machine Panasonic?

    Gorenje 6kg 1200spin around £320 up to 9kg 1600 spin for around £440. They do 7kg and 8kg machines in between those prices. Check with the retailer as only some models come with the 5 year promotional guarantee and they must be registered online within 28 days.

    in reply to: Help me buy a washing machine Panasonic? #399464
    bazza500
    Participant

    Re: Help me buy a washing machine Panasonic?

    …Or go for Gorenje. 5 years guarantee and spares are easily got.

    in reply to: Service net /Go Local #399429
    bazza500
    Participant

    Re: Service net /Go Local

    I don’t think there is any need. Let’s not get the WTA involved in telling it’s members who to and who not to do work for.

    in reply to: Brand new washing machine is wet inside #399300
    bazza500
    Participant

    Re: Brand new washing machine is wet inside

    Yes this is normal. As far as I’m aware all washers are water tested in the factory.

    in reply to: Next Up On TV #397654
    bazza500
    Participant

    Re: Next Up On TV

    lee8 wrote:
    They were not out on calls and they where all together in a room.

    I may sound harsh, but the intellect found in this industry and i’m sure in others is ridiculous.


    Yep.

    in reply to: LG fridge light switch #398232
    bazza500
    Participant

    Re: LG fridge light switch

    Can only find a GR181SXA. But LG site password is not working so cannot get part number for switch.

    in reply to: Indesit WIDXL146 module #398076
    bazza500
    Participant

    Re: Indesit WIDXL146 module

    As far as I’m aware Indesit don’t sell preprogrammed modules. You need to buy a card reader and program card to do it.

    in reply to: LG GR-359SQ PART NUMBER REQ #397608
    bazza500
    Participant

    Re: LG GR-359SQ PART NUMBER REQ

    There is 3 versions of this appliance. You will need the suffix which will be EWQLGU, AEWQCOM OR AEWQLGU.

    in reply to: Baumatic BDW13 #397149
    bazza500
    Participant

    Re: Baumatic BDW13

    Had quite a few of these. If the heater is fine it’s usually been the pcb.

Viewing 15 posts - 256 through 270 (of 1,916 total)