[beermontypython]

beermontypython wrote:I have had this machine about 4 years and have been perfectly happy with it until today when after turning on and starting the cycle after 2/3 minutes the start button turns red but the machine continues to run, I have searched high and low but cant find the user guide. I am 78 years of age and dread the thought of having to buy a new one. I would be very grateful for any advise… Thank you

I should mention that I clean the filter at the bottom regularly and have checked that it is clean, the door filter is also clean, the water tank is empty.

[beermontypython]

Re: John Lewis Condensor Tumble Drier JLTDC03 no heat

electrofix wrote:no really its how long is a peice of string
have not had this fault yet so only going by tech info

not sure without looking it up but does this unit have a timed dry programme. if so it may work on that as it may not need to use this sensor

dave
I have tried it on a 20 minute dry, it works but no heat

[beermontypython]

Re: John Lewis Condensor Tumble Drier JLTDC03 no heat

Hi dave if it is what you have suggested then I think it’s gonna cost me well over £100. I had a fault with it just over a year ago when it was dead.
When the service bloke came, It had to have a new control panel which took him over an hour and seemed to be a cow to get at and put back.So if it is the conductimetric sensor I reckon it might mean a new machine.

I have had a look at the heater and done a continuity check on the elements and what I think are the thermostats both seem ok, but I have ordered a replacement from Ransons which I can return if not used. I ordered one just in case my testing identified a fault to save time on postage. My wife is going barmy having 2 daughters as well makes it difficult without the dryer… Can you tell me Dave if the fault is the part you mentioned would the elements still heat up when I turn it on.
I have stood at a safe distance with the elements visible and turned the dryer on but they dont warm at all.

[beermontypython]

Re: John Lewis Condensor Tumble Drier JLTDC03 no heat

Thanks for that Dave,, any idea on cost

[beermontypython]

Re: Viesmann 35kw boiler heating is off but pump keeps runni

Thanks for,the reply but,I didn’t expect anyone to start advising me to mess with a gas appliance I just wondered if someone on this forum new enough to just advise if turning it off/on would help.
Rather than call an engineer out to do just that..

[beermontypython]

Re: john lewis condensor tumble dryer turns off after minute

sorry for the delay in replying but would you believe it , the machine is now working perfectly,,,, strange ????? but than you anyway

[beermontypython]

Re: john lewis condensor tumble dryer turns off after minute

jltdc03

[beermontypython]

Re: Duraspeed shower pump failed need a good replacement

thanks don

[beermontypython]

Thank you for the reply,,,I have decided that enough is enough,, I saw one listed on Ebay at a cracking price and bought it, strangely enough I know the person selling it and they live very close so I should be ok.

[beermontypython]

Re: blomberg 1501 AAA wont take conditioner

IS THE COIL A DIY JOB OR DO I NEED TO GET AN ENGINEER IN.

IF IT IS A DIY ARE THERE ANY GUIDLINES AVAILABLE ANYWHERE,, I’M NOT A COMPLETE IDIOT AND WOULD BE HAPPY TO TAKE ALOOK AT IT.
THANKS

[beermontypython]

Re: blomberg 1501 AAA wont take conditioner

blimey Penguin that was a quick reply,, I have just been in and cleaned all the holes out,, what I’m a bit confused about is that the holes are over the wash powder sections but there isn’t any holes over the conditioner compartment,, am I being a prat??

[Author]

Posts