[blackandwhites]

Re: Servis M6003 washing machit!

I,m sure I had this one some time ago,and I seem to remember I ended fitting a new main control pcb and the small option button module behind the facia.
Hope it helps.——-Steve

[blackandwhites]

Re: LG WD12124RD Te fault

😳 I feel like a right nugget.
It,s funny how you get stuck in a certain train of thought.Guess what it was?????
THE DRIER THERMISTOR>

[blackandwhites]

Re: AEG S75348KG FRIDGE FREEZER

Thanks for that Dave
Steve

[blackandwhites]

Re: beko wma1715s

Just in case anyone else gets this fault.
When i returned i filled up with water and waited for drum rotation.This time it went straight into fast spin(it didnt last time i tried it )
It turned out to be a partially severed wire to the motor tacho.
Steve

[blackandwhites]

Re: Zanussi WJD1257W

E91—-Communications error between pcb and display board
Check ribbon cable connections to display board(sometimes loose) and main pcb.May be faulty display board or main pcb.
Good luck Steve

[blackandwhites]

Re: caple PIS 900 cooker hood

I suppose its handy if your a lazy git
Thanks for the info…Steve

[blackandwhites]

Re: ZANUSSI W/D WDA1255W,NOT DRYING

I usually find the condenser tube on these models are blocked (if badly blocked the entrance to the fan chamber can also be blocked)with lint,or sometimes the triple cold valve,may not be letting any water through.
Its also easy to forget that a partially blocked filter can stop the pump from empying the water out sufficiently for the short time it is on.(it may empty ok on wash when its on continuously)
Hope im not teaching my granny how to suck eggs.
Steve

[blackandwhites]

Re: Brant d/w & washing up liquid

Just a stab in the dark,but maybe the washing up liquid has caused it to overfoam and has created air lock/blockage in pressure system,which is preventing initiation of circulating pump and heat.
Steve

[blackandwhites]

Re: zanussi zwx1605w

Cheers Martin

Steve

[Author]

Posts