Forum Replies Created
-
Posts
-
Re: Gauge manifold & hoses.
hi Spindoctor,
what refrigerant gas gauges are you after and do you want single or double guage manifolds.
Bob.
Re: Static caravan fridge freezer not working
Hi Tom A,
have you turned on the heating in the caravan yet as the thermostat may still think the fridge is cold enough and will not turn the compressor on.
Bob.
Re: Hoover/candy made washer dryer HJA8703 PCB req.
unprogrammed module is 41026981
programmed module is 49011011Bob
Re: tce7124w
Door lock is 125425154
temp sensor located at 12 oclock position inside the drum is 1254041005.Bob.
Re: Beko CDA647FW/1 F/F not working
Hi nospin,
two types of appliances with that model no. one has a manual defrost timer located to the left hand side of the compressor these do fail,
the second is controled by an electronic pcb located on the rear at the top,
try putting live and nuetral directly onto the compressor and see if it runs, if it does its the timer or pcb if not its the compressor.
Bob
Re: Hotpoint C367EXH – OVEN FAN
part number for the fan motor is C00199560 and the insulator/spacer is C00199746.
is that the parts that you have ?.Bob.
Re: Thermal Imaging
you mean one of these,
http://instrotech.com/thermal-imaging-t … 4wodLBAHkQ
Bob.
Re: Hotpoint halogen hotplate wiring
Hi Geoff,
that part should have come with a wiring leaflet if it did not please pm me your email address and i will send some info
Re: Cooker wire
looking at the data sheet the 1.5mm will be fine for the supply and the 1 mm for the other internal wiring.
Bob.
Re: Cooker wire
Hi Spanner51,
the cable should be ok for build in single ovens and possibly double ovens but if in the main supply from the terminal connector it should be at least 1.25 mm.
Bob.
