Forum Replies Created
-
Posts
-
Re: LG drum change/pulley help
hi minge
there is a spacer available from lg for this problem but i dont have the part no handy, but if you type lg washer into connections it does come up, failing that i can get the part no. tomorrow for you.
Bob.
Re: SAMSUNG RSH1 Series American Style Side-By-Side
there is a mod out for ice balling on the left hand side of the evaporator cover it involves moving the sensor.
Bob
Re: Candy Washer Dryer – CMD 146
is the engineer from the candy group ?.
there is a pulley an belt change to fix this.
Bob.
Re: Candy Washer Dryer – CMD 146
if it only 10 months old then call the manufacurer as there is a fix for this problem.
Bob.
Re: LG WM1480 FHD washing machine showing ‘DE’
DE is the door lock error
on the manual type of door lock it is usually the handle pin that has worked loose.on the electic opening type ive had the door interlock fail and the mains input filter panel cause the problem, let the door lock then tap the mains input panel on the to rh side of appliance if the door unlocks its a dry joint on the pcb (replacement is the only cure.
LE is a motor related fault. (hall sensor)
Bob.
Re: hotpoint ff187ep strange fault
after power interuption on this model it will flash the facia lights to tell the customer it has suffered a power cut. just reset it by switching off both controls then set them back to the i care setting.
Bob.
Re: LUX EWD1409I
hi
E52 No signal from motor tachometric generator Motor faulty; wiring faulty; PCB faulty.
its test meter time im afraid or it could be the tacho has worked loose.
Bob.
Re: Whilpool Oven AKP950 White Door glass
hi Keith,
production number is needed to obtain the correct part for this model as it has quite a few variants.
Bob.
Re: zanussi TCE7227W TUMBLE DRYER
Hi Garn,
any condenser dryer should not be letting the steam from the clothes out to atmosphere, there must be seal on the tub or condenser unit letting it escape, does the water container fill up at all.
Bob
