Forum Replies Created
-
Posts
-
Re: ELBA PX906 Cable overheating
you need to think about this carefully,
if the cable is getting hot and its 2.5 mm it has to be drawing more than 13 amps.i would avise you to contact an appliance engineer.
Bob.
Re: Soveriegn next?
sorry Alex for not making that very clear,
but if CDSL are looking after the account the agents should get paid.Bob.
Re: Soveriegn next?
anyone dealing direct with them or is it just through CDSL.
website is now down just get the link below, and the site has just been updated.
http://dhconsulting.com/suspended.page/be carefull.
Bob.
Re: hotpoint thermister
Hi John,
try part no. C00083915 heater ntc IDC connector.
C00081653 amp tag connections
Bob.Re: Electrolux ER7626B fridge freezer problem
Hi arosview,
i would be looking for a defrost problem, turn defrost timer to the defrost position and remove the freezer evaporator cover and check if the heater is working if yes change the timer if not check the heater and thermal cut outs.
Bob.
Re: LG WM12230FB
if the drain pump is running all the time the main pcb is faulty.
does it run all the time on the self test mode ?.
Bob
Re: LG WM12230FB
Hi aqua_serve
does the drain pump run all the time ?.
the code in the display is normal.
does the dianostics work correctly.Bob.
Re: BEKO AS920 Fridge/Freezer
dmac1982,
not quite sure about that i will have to read the service manual,
i would think it will go into emergency timed cooling / freezing cycle but to be on the safe side check the tempreture regularly or start moving your frozen food to a working freezer.Bob.
Re: BEKO AS920 Fridge/Freezer
Hi dmac1982,
E0 is a sensor fault best call out an engineer.
plug out if you have a go yourself.
Bob.
