BobHope

Forum Replies Created

Viewing 15 posts - 1,156 through 1,170 (of 1,373 total)
  • Author
    Posts
  • in reply to: Arrow Electric Oven #159708
    BobHope
    Participant

    Re: Arrow Electric Oven

    please ensure you have set the clock and the display is not flashing,
    press and hold the 2nd (cookpot) and 3rd (Stop) buttons from the left together for 2 seconds this cancels any set program and returns the clock to manual mode, the A symbol should not be lit just the cookpot symbol, hope that makes sense. if not drop me a pm with your address and i will send a photocopy to you. 😀

    Bob

    in reply to: Arrow Electric Oven #159706
    BobHope
    Participant

    Re: Arrow Electric Oven

    oh i see it that model sorry abt that, 😳 has the clock got 3 or 5 buttons,

    Bob.

    in reply to: Arrow Electric Oven #159704
    BobHope
    Participant

    Re: Arrow Electric Oven

    the timer hand symbol or (M) should be at the top and not the 0 symbol.

    Bob.

    in reply to: Arrow Electric Oven #159702
    BobHope
    Participant

    Re: Arrow Electric Oven

    Hi fumanchu,
    dave at spares should pick the info up as i am sure the shop has the element in stock, or email spares@ukwhitegoods.co.uk.
    part no teba 10110492

    Bob.

    in reply to: Arrow Electric Oven #159700
    BobHope
    Participant

    Re: Arrow Electric Oven

    Hi fumanchu,
    model no. would help, its got the letter GB in the middle.

    ensure the timer is in the manual (hand) position, failing that it most likely to to fan element failure, unplug the appliance before any investigation.

    Bob.

    in reply to: Scottish Training Sessions #156943
    BobHope
    Participant

    Re: Scottish Training Sessions

    have you sorted out dates and venues yet, as i am not busy and cant wait to see the new appliance i might just come to you for a change. 😀

    Bob.

    in reply to: Armana american fridge freezer SXD522VE #159130
    BobHope
    Participant

    Re: Armana american fridge freezer SXD522VE

    Hi Howie,
    pm me a email address.

    Bob.

    in reply to: It’s dead! #158356
    BobHope
    Participant

    Re: It’s dead!

    Hi lads,
    im at work but its dead, still got calls to do but they were booked before xmas,

    all the best.

    Bob. (freezing cold).

    in reply to: Servis Washer Drier M9309 #158134
    BobHope
    Participant

    Re: Servis Washer Drier M9309

    have you checked the half load button as that supplies the dryer.

    Bob.

    in reply to: Servis S900 #157481
    BobHope
    Participant

    Re: Servis S900

    Hi Bryan
    i think the part no. is 41600090 but i need the product code to conferm this.

    Bob.

    in reply to: SEME & Qualtex #156530
    BobHope
    Participant

    Re: SEME & Qualtex

    if i get 10 mins tonight i will tel my story 😀

    Bob.

    in reply to: Diplomat Freezer APP6403…Comp Relay? #156894
    BobHope
    Participant

    Re: Diplomat Freezer APP6403…Comp Relay?

    hi laurence
    its rare for a danfoss start relay to pack up without showing severe signs of a burnout and a terrible smell, the capacitor can be a run or start capacitor depending on the type of compressor fitted, look at the uf value if its low 8-12uf itas a run type , if its 60-80uf its a start capacitor, the relay is easy to obtain.

    hope that helps.

    Bob.

    ps i would suspect compresser has failed.

    in reply to: Cnady upright freezer problem #156638
    BobHope
    Participant

    Re: Cnady upright freezer problem

    hi alan
    i am afraid your refrigeration system has become blocked, but before you call an engineer or decide to replace the appliance move the freezer to a normal household temperature for 24 hours before switching the appliance back on, you my be lucky and free the blockage. 😀

    Bob.

    in reply to: SEME & Qualtex #156527
    BobHope
    Participant

    Re: SEME & Qualtex

    small elephant mamoth elephant, i can even tell you the story as well. 😀

    Bob.

    in reply to: LG de error code but still works #156441
    BobHope
    Participant

    Re: LG de error code but still works

    hi Mark
    check the door catch and handle, the pin sometimes works its way out from the bottom hole, failing that its the door interlock its self.

    Bob.

Viewing 15 posts - 1,156 through 1,170 (of 1,373 total)