bubs

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 193 total)
  • Author
    Posts
  • in reply to: Candy CIW 100T facia parts #343743
    bubs
    Participant

    Re: Candy CIW 100T facia parts

    Thanks Martin,
    I tried to swop over one of these options to use on the door push but it needed a little alteration. Will order a couple up and see. Cheers
    Graeme

    in reply to: Electrolux cooling fan EOB5100X #342011
    bubs
    Participant

    Re: Electrolux cooling fan EOB5100X

    I looked it up on a later TDS and it does give the same part number.

    Had a look at another similar model and they have fitted a smaller then normal but more standard looking tangenital fan motor.

    Have ordered so will see what turns up.
    Graeme

    in reply to: Electrolux cooling fan EOB5100X #342010
    bubs
    Participant

    Re: Electrolux cooling fan EOB5100X

    Sorry, forgot to say 949712732-01 is the number i have

    Graeme

    in reply to: Tricity Bendix BD911 Grill Regulator #338038
    bubs
    Participant

    Re: Tricity Bendix BD911 Grill Regulator

    Phoned Service Force who say this is obsolete, will try and wire in something.
    Graeme

    in reply to: Bosch WVT1260GB/01 drier heater probs. #334012
    bubs
    Participant

    Re: Bosch WVT1260GB/01 drier heater probs.

    hi, you didn’t mention the water valve.
    Probably just forgot to list it?
    Graeme

    in reply to: Beko Dishwasher DWD8657W no heat #333807
    bubs
    Participant

    Re: Beko Dishwasher DWD8657W no heat

    Thanks mate.
    If customer ok will order a pcb, cheap enough.
    The ntc value sounds about right.
    will update if i go back.

    in reply to: AEG 40250I-W D/W Prod no.91123454201 mod motor change #333646
    bubs
    Participant

    Re: AEG 40250I-W D/W Prod no.91123454201 mod motor change

    Not saying this is the same model but the mains filter was linked through the motor plug on one i did last week. Explains the direct feed.
    Graeme

    in reply to: Beko WMA520S button cradle #329087
    bubs
    Participant

    Re: Beko WMA520S button cradle

    Thats it 😀
    Thanks leavemetogetonwithit

    in reply to: Belling Thermostat for Baby Belling 120R MK6 #325919
    bubs
    Participant

    Re: Belling Thermostat for Baby Belling 120R MK6

    Fitted the Masterpart stat, its the same no re-wiring needed.
    Part BL1483
    47TH4/F5 is the number on the thermostat.
    Cheers
    Graeme

    in reply to: Belling Thermostat for Baby Belling 120R MK6 #325917
    bubs
    Participant

    Re: Belling Thermostat for Baby Belling 120R MK6

    A friend has traced this to a Masterpart stat that may need a bit of wiring change. We have a c/diagram so will give it a go next week.

    Graeme

    in reply to: Belling 100E-AN grill parts #325237
    bubs
    Participant

    Re: Belling 100E-AN grill parts

    Found them,

    Element 082613456
    Regulator 082625700

    Graeme

    in reply to: Whirlpool dishwasher “pulsing” fault #324766
    bubs
    Participant

    Re: Whirlpool dishwasher “pulsing” fault

    Hi,
    Don’t think a wire fault as it is such a consistent pulsing. Going to go back and change all the caps i can see. Will report back if it works.
    Cheers
    Graeme

    in reply to: diplomat 3230 outer glass s-steel #324644
    bubs
    Participant

    Re: diplomat 3230 outer glass s-steel

    Thanks lads, ordered today.
    Graeme

    in reply to: Diplomat APM8542 pipe #317842
    bubs
    Participant

    Re: Diplomat APM8542 pipe

    Thanks chaps, split half way round at the pump end.
    Graeme

    in reply to: Whirlpool heating element AWO/D 5706 #315736
    bubs
    Participant

    Re: Whirlpool heating element AWO/D 5706

    Fitted a Connections ELE9044, the Bosch plastic tank element.

    Thanks
    Graeme

Viewing 15 posts - 16 through 30 (of 193 total)