bubs

Forum Replies Created

Viewing 13 posts - 181 through 193 (of 193 total)
  • Author
    Posts
  • in reply to: Washing Machine Dimensions #160731
    bubs
    Participant

    Re: Washing Machine Dimensions

    I delivered the Bosch to an old lady, she was very pleased with it. Obviously no good for family use.
    The trouble with this situation is however may times you measure it, when they have doors in front you never know if it fits until you find it doesn’t πŸ™ Most new machines are more rounded on the front, “my old one fitted ok” is no use.
    Graeme

    in reply to: General Electric WMA8852RBMMWW fill valve #160777
    bubs
    Participant

    Re: General Electric WMA8852RBMMWW fill valve

    Thanks very much.
    I had a friendly shop (do some work for) order most of my parts at trade but moving this to my end. These odd bits are tricky so I really appreciate the advice πŸ˜€
    Graeme

    in reply to: Washing Machine Dimensions #160729
    bubs
    Participant

    Re: Washing Machine Dimensions

    Hi, Yes Zan still produce one and so do Bosch. Dont have the models to hand though.
    Graeme

    in reply to: hygena APL 3418 grill element #160376
    bubs
    Participant

    Re: hygena APL 3418 grill element

    Cheers Chris, Getting cheaper πŸ™‚

    in reply to: WMA31 module failure. #160143
    bubs
    Participant

    Re: WMA31 module failure.

    It is odd that people can have similar calls and see completly different ratios of faults. I have repaired many broken motor wires; only had one pcb damaged, but have had at least 10 taken out by the door interlock. Maybe my customers slam the door in frustration πŸ™‚
    Graeme

    in reply to: hygena APL 3418 grill element #160374
    bubs
    Participant

    Re: hygena APL 3418 grill element

    Thank you very much Dave πŸ˜€

    in reply to: Ariston programme selector switch #158735
    bubs
    Participant

    Re: Ariston programme selector switch

    I Had a “heater realy” fault last week, was the thermistor!
    Cheers
    Graeme

    in reply to: WMA31 module failure. #160140
    bubs
    Participant

    Re: WMA31 module failure.

    Hi, The small chip in the corner is connected to the door lock. I have replaced many of these locks but it doesn’t always blow the chip, but whenever the chip is blown i always change the lock and check the door seal.
    Regards
    Graeme

    in reply to: Ariston AFA350X #159652
    bubs
    Participant

    Re: Ariston AFA350X

    To answer my own question; went today, the heater unit was OC. So if you find a merloni DW indicating no fill; look at the heater.
    Graeme

    in reply to: miele w404 plus conditioner #157038
    bubs
    Participant

    Re: miele w404 plus conditioner

    Thanks, It’s 18 months old. Started to work again now, i will have to make something up to clean it out; Very tricky to get to.

    in reply to: Creda 37747 Condenser dryer #153345
    bubs
    Participant

    Re: Creda 37747 Condenser dryer

    Had a recall on one myself, found the motor cap was faulty, was not pulling a full load; no fan; overheated stat.

    in reply to: New Breed of Twin Tubs #156519
    bubs
    Participant

    Re: New Breed of Twin Tubs

    We delivered a Qualtex TT, customer was happy with it; However the Tub-Pump hose split in 3 weeks. It is built like a toy.

    in reply to: Whats the most annoying thing customers do? #107353
    bubs
    Participant

    Re: Whats the most annoying thing customers do?

    My first post, glad to find this site!

    I had an elderly man answer the door in a fluster. He popped his head round the door and said I hope I don’t mind but he was undressed. I thought he was showering so said β€œdon’t worry about it” and walked to the dishwasher. He followed me and stood, naked, while I fixed it. I always thought the customers home is not my domain but next time I get a naturist I may ask for some clothes (unless under 45 female).

Viewing 13 posts - 181 through 193 (of 193 total)